ThermoPro TM-01 - Digital Kitchen Timer Manual

Features

1. Large LCD screen displays TIMER or CLOCK by switching the selector.
2. Backlight display: Touchable backlight button or press any button.
3. 4 adjustable volume settings: off, low, medium, and high.
4. 12/24-hour time format for different needs.
5. Function: Countdown timer or count up timer.
6. Countdown time range: 99hour59min59sec.
7. Count up time range: 99hour59min59sec, infinite cycled.
8. Tabletop and magnet-mountable design.
9. 9.2 AAA batteries included

Key Definition

Buttons

MODE: Switch between TIMER/CLOCK function.
HR/+: Press to set the hour in the TIMER mode and increase the digits of hour in CLOCK mode. Press and hold to quickly scroll through digits; Select between 12/24 hour clock.
MINI-: Press to set the minute in the TIMER mode and increase the digits of minute in CLOCK mode. Press and hold to quickly scroll through digits; Select between 12/24 hour clock.
SEC: Press to increase the digits of second in CLOCK mode. Press and hold to quickly scroll through digits.
START/STOP: Press to start or to pause in the TIMER mode; Select between hour/minute/second in CLOCK mode.
VOL: Press to cycle through the volume settings - off, low, medium, and high.
"": Press to activate a backlight, if no further button presses for 10s, the backlight will automatically turn off.

Start a Countdown Timer

1. Power on the timer and it should be in the default TIMER mode. If not in TIMER mode, press the MODE button to switch between modes.
2. Press "HR/+" to set the hour, press "MIN/-" to set the minutes, press "SEC" to set the seconds. Press and hold the buttons to increase digits rapidly.
3. Press "START/STOP" to start the timer or pause the timer.
4. To clear the timer to zero, press "START/STOP" to pause the timer, then press "HR/+" and "MIN/-" at the same time.
5. When the countdown timer reaches 0:00:00, the timer will beep and flash for 1 minute and start to count up. Press "START/STOP" to stop the alarm.

Start a Count Up Timer

1. Press "HR/+" and "MIN/-" together to clear all digits.
2. Press "START/STOP" to start to count up function, and press "START/STOP" to pause it.

Set CLOCK

1. Power on the timer, and press "MODE" to select CLOCK.
2. Press and hold the "START/STOP" button to choose between 12-hour or 24-hour time. Press "HR/+" or "MIN/-" to switch between 12Hr and 24Hr then press the "START/STOP" button again to confirm your selection.
3. Press "HR/+" to increase the hour or minutes and press "MIN/-" to decrease the hours or minutes. Press and hold the buttons to quickly scroll through the digits.
4. Press "START/STOP" to confirm the correct hour then repeat for minute as well.

Adjust alarm volume

The timer has 4 alarm volume settings, press "VOL" to select between off, low, medium and high.

Backlight feature

Pressing any buttons or press touchable backlight button will activate a backlight, if no further button presses for 10s, the backlight will automatically turn off.

Customer service

Telephone:
1-877-515-7797 (USA & Canada only)
44-203-769-1321 (UK)
Email: service@buythermopro.com
Hours:
Weekdays 8:00 AM- 8:00 PM EST (USA & Canada only)
Weekdays 1:00 PM-12:00 PM CET (UK)