Advertisement
Get to know your Cricut Autopress
Handle
Indicator Lights
Orange = heating up
Green = ready to use
Red = machine
locked or Control
Pod disconnected
Heat Plate
Gets very hot during use
Pressing Mat
Platen
Power Button
Lock/Unlock
USB Port
USB Cable
Power Port
Power Cord
Control Pod
Control Pod
Preset Buttons:
Press for 3 secs to save settings
Temperature
Set Temperature:
Use dial to adjust
Timer:
Starts when handle is pressed
Set Time:
Use dial to adjust
Micro-USB Port:
Connect machine cable
CO/FO Toggle:
Switch from Celsius to Fahrenheit
Use your heat press.
Before using for first time, activate Cricut Autopress at cricut.com/setup. Follow on-screen instructions set up press and connect to Design Space*
- Get time & temperature settings for your project at cricut.com/heatguide
- Position project on Pressing Mat (4)
- Use Handle (1) to lower heat plate
- Press handle to start timer
Note: Timer starts automatically
- Heat plate lifts automatically when complete
- Carefully remove project
Heat Plate (3) gets very hot during use. Platen (5) may become hot during use. Handle with care. Read safety instructions before use.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Autopress and is the answer not in the manual?
Questions and answers