MAJORITY Oakcastle DVD100 - DVD Player Manual
  1. Manuals
  2. Brands
  3. MAJORITY Manuals
  4. Turntable
  5. Oakcastle DVD100
  6. User manual

MAJORITY Oakcastle DVD100 - DVD Player Manual

Advertisement

Table of Contents
Contents
MAJORITY Oakcastle DVD100 - DVD Player Manual

Register your product online for a FREE 3 year extended warranty at: www.oakcastle.co.uk

What's in the Box

  1. Oakcastle DVD100 DVD Player
  2. Remote Control
  3. User Manual
  4. 2 x AAA Batteries
  5. RCA AV Cable
  6. Power Adapter
  7. HDMI Cable

Controls & Functions

Remote Control

Remote Control

  1. On/Off
  2. Angle: Change angle in DVD mode (for discs with multi-angle recording)
  3. Programme
  4. O-9/10+: While playing DVD/VCD/CD/ MP3 discs, use key to select desired track/chapter in menu selection.
  5. Rewind (<<)
  6. Fast Fo ward (>>)
  7. L/R: Use for VCD or CD discs. Press to select left or right channel, or stereo
  8. Play/Pause
  9. Setup: Press for setup menu
  10. Navigate up
  11. Navigate left
  12. Enter/Confirm
  13. Menu: Return to main DVD title menu
  14. Mute/Unmute
  15. Audio
  16. Volume up (+)
  17. OSD
  18. Volume down (-)
  19. Zoom: During DVD playback, press repeatedly to zoom in or zoom out the frame. When in zoom in mode, use arrow keys to move picture.
  20. Open/Close DVD Tray
  21. Subtitle (disc dependent)
  22. Video: Switch to video output mode (cvbs.yuv.ypbpr)
  23. GOTO: Press once to bring up 'GOTO' menu. Use the number keys to input Title or Chapter number and time, and use the arrow keys to move between Title/Chapter/Time input.
  24. Next (>>l): In DVD mode, press to go to next chapter. With SVCD, VCD, CD, MP3 discs and USB, press to go to next track.
  1. Previous (1<<):In DVD mode, press to go to previous chapter. With SVCD, VCD, CD, MP3 discs and USB, press to go to previous track.
  2. Stop
  3. Title: Go to Title menu
  4. Navigate right
  5. Navigate down
  6. Return: Return to the root DVD menu.
  7. Reset: Reset DVD player settings
  8. Repeat: Press repeatedly in DVD mode to scroll through the following options: repeat the Chapter, Title, All tracks/ scenes, or Repeat Off. In SVCD, VCD or CD mode: Repeat Track, Repeat All or Repeat Off.
  9. A-B: Press to repeat certain sections. Press button on start point (A) and the end point (B) to select section. Cancel by pressing button a third time. by pressing button a third time.
  10. PIN: Open the disc tray, then press to switch the TV system between AUTO, PAL and NTSC.
  11. USB: Press to switch between DVD/ USB.
  12. Slow: Press to select slow speed playing (press repeatedly to select between 1/2, 1/4, 1/8, 1/16 slowed)

Front & Rear View

Front & Rear View

  1. DVD Tray
  2. Display
  3. Remote Sensor
  4. USB Port
  5. Open/Close
  6. Play/Pause
  7. Stop
  1. Power On/Off
  2. (Y.Pb/Cb. Pr/Cr) Output
  3. HDMI Output
  4. 2 x Audio Output ports
  5. Video Output
  6. Power Port

Getting Started

Setting Up

Connect the DVD player power adapter to a wall outlet. Press the power button (Ref.44/Ref.1) on the unit or remote control to turn on your DVD player, the display on the front panel will illuminate.

Follow one of the steps below for connecting your DVD player:
Connecting Via RCA Cable
Connect an RCA cable between the 2 channel Audio Output port and the RCA input on your TV.

Connecting via HDMI
Connect a HDMI cable between player (Ref.46) to the HDMI input on your TV. )

Connecting via Component (Y Pb/Cb Pr/Cr) Cable
Connect a (Y Pb/Cb Pr/Cr) cable via the (Y/Cb/Pb Cr/Pr) Output of the DVD player ( (Ref.45) to your TV (R/L/Video port and cable)

Programme Button
If the disc has two or more tracks, chapters, or titles, if desired, you can set up playing order preference to be in a different order to the default order. Press the PROG button (Ref.3) to open up Program mode, then use the number buttons (Ref.4) to input the number ) of the track, title or chapter. To enter a double digit number, first press the 10+ button once to get 10, twice to get 20, and so on, followed by the second digit of your preference. Use the up/down/left/right keys (Ref.qo/Ref.«/Ref.28/Ref.29) to move the cursor to the next track, chapter or title position you wish to program. After programming, navigate to the 'PLAY' button the screen, then press ENTER button (Ref.12) to start program playing. Navigate to the CLEAR button on the screen, then press ENTER button (Ref.42) to clear all settings. To exit Program mode, press the PROG button (Ref.3) again.

DVD Operation

Supported Disc Types: CD, CD-R, CD-MP3, CD+RW, DVD, DVD+R, DVD-R, DVD+RW, DVD-RW.

Supported File Types: MP3, DVD, DVD-R-RW. .

  1. Ensure that your TV is set to the correct mode for DVD playback.
  2. Plug in the DVD player and press the 'Power' button to turn the unit on. You can do this on the unit (Ref. 44) or via the remote (Ref1). ). When the machine is switched on, pressing the POWER button on the remote control will make it go into standby mode (Ref.1). ). Press the button again and the machine will switch on.

    If the product will not be used for an extended period of time, it is advisable to unplug it for safety.
  3. Press the Open/Close button on the front panel (Ref.41) or on the remote control (Ref.20) and place a DVD disc on the disc tray. Press the Open/Closebutton again to close the tray.
  4. The DVD player will read the DVD disc and begin playing. You can control the playback and settings via the remote control.

information NOTE: Selecting the Correct Region
If you are experiencing issues playing discs, please follow the instructions below:

  • Press 5-1-6-8 on the remote control
  • Use direction keys to choose region
  • Choose 'all regions'

USB Operation

USB Playback
This device has a USB port in the front interface for MP3/Movie playback.

Insert a USB device into the USB port (Ref.40).

Press the USB button on the remote control (Ref.35) and select 'USB' to switch the source to USB. The DVD player will display the file list on the USB drive and start playing the first track. Browse through the file list by pressing the up and down buttons (Ref.10/Ref.29) on the remote control. Select a file by pressing the Enter button (Ref.12) of the remote control.

USB Drives and MP3 Discs - Playback controls
When playing from an MP3 disc or USB drive, use the following playback controls.

Use the Play/Pause button (Ref.8) to play or pause a track.

Use the Stop button (Ref.26) to stop a track.

Press the Previous/Next buttons to skip to the previous or next track.

Use the Rewind/Fast Forward buttons (Ref.5)/(Ref.6) to rewind or fast forward through a track.

Programme Mode
To begin programming the tracks to play in a specific order, press the PROG button (Ref.3).Use the buttons to shift to the next track position you wish to program. Then use the digit buttons (Ref.4) to key in the track you wish to program to that position. Follow these steps for each track slot. When finished, select Start to play the tracks in that order.

To exit Program mode, press the PROG button (Ref.3) again.

information Note: USB port does not support USB charging for external devices.

System Set-Up

Press the SETUP button (Ref.9) on the remote control and the Settings will display. The menu options are as follows:
Menu 1 System Setup
Menu 2: Language Setup
Menu 3: Video Setup
Menu 4 Audio Setup
Menu 5: Digital Setup

After accessingthe Setupmenu, usethebuttons (Ref.10)/(Ref.11)/ (Ref.28)/(Ref.29) to access your chosen sub-menu/function.

Press left to go up back up a level, and press right to go down a level into the selected sub-menu/ function options. Press the ENTER button (Ref.12) to confirm your selection.

To exit SETUP mode, press the SETUP button again (Ref.9). Follow the guidance on the next pages for editing these settings.

TV System(NTSC/PAL/AUTO): If TV systemis selected, use the and Enter buttons (Ref.12) to set the TV Type to AUTO, NTSC or PAL depending on the color system of your TV. This player conforms to the NTSC and PAL color systems. However, if you are in the USA, Canada or Mexico, leave this setting on NTSC. If incorrectly set to PAL, the TV picture may roll vertically. In this case, set the TV system to NTSC.

Screensaver: Turn screensaver on or off. If switched on, the screensaver will come on when the unit idles or the image is paused for several minutes.

TV Type: Select the Aspect Ratio to match the connected TV (16:9, 4:3 LB ("Letter Box"), or 4:3 PS ("Progressive Scan")).

Password: To set a new password for playing content rated at or above a rating of your choice (selected using the 'Rating' sub-menu below), first select 'Password' by pressing the Enter button (Ref.12). Enter the default password (0000) and press Enter (Ref.12). Key in your new 4 digit password using the numeric buttons ( (Ref.4). Press Enter (Ref.42) again to confirm your password. View or change the rating of the content you wish to protect with a password using the 'Rating' sub-menu below.

Rating: Select the desired rating level from the following list: Kid Safe, G (All ages), PG (Parental Guidance), PG 13 (Parental Guidance for children less than 13 years old), PG-R (Parental Guidance suggested for children under 17 years old), R (Parental Guidance stronly suggested for children under 17 years old), NC-17

Resume:Select to set auto-resume to 'Off' or 'On'. If switched on, the unit will resume playback from the point where the disc was last stopped.

Default: Select to reset the unit to factory settings.

Osd Language
Select a language for the on-screen display language (languages available disc dependent).

Audio Language
Select a language for the audio (languages available are disc dependent).

Subtitle Language
Select a language for the subtitles (languages available are disc dependent).

Menu Language
Select a language for the menu (languages available are disc dependent).

HDMI Output
Set the resolution output to match the connected TV.

Video
If your TV is connected to the unit via a video jack, select CVBS.
If your TV is connected to the unit via Y, Pb/Cb, and Pr/Cr jacks, select YUV or YPbPr.

AUDIO OUT- Using the arrow buttons on the remote control, select the submenu ' Audio Out', choose one of the following options to set the audio, then press the 'ENTER' button to confirm your selection.

These options are:
SPDIF/ OFF- Select this option to switch off the digital audio output.
SPDIF/ RAW —Select this option in case the DVD player is connected to an amplifier using the coaxial/HDMl cable.
SPDIF/PCM- Select this option in case the DVD player is connected to a 2nd channel digital stereo amplifier.

Troubleshooting

Symptoms Solutions

No power/function

Check that the power is switched on at the wall.
Check that the power adaptor is properly connected to power outlet.

No video

Make sure that the video cables are connected correctly.
Check that the input setting on the TV is correct.
Press the VIDEO button repeatedly until correct picture appears on TV. Re-install the connection cables.
Reset the settings of the DVD player.

No audio

Make sure that the audio cables are connected correctly.
Make sure that the coaxial connected stereo is powered on.
Re-install the connection cables.
Reset the settings of the DVD player.

Disto ted video or rolling picture

 Clean DVD disc of dust/dirt
The playback is on rewind/fast forward mode.
Press the PIN button repeatedly to set the color encoding to the correct system to match the connected TV.

Unable to play

 Place a DVD disc in the disc tray.
Place the disc in with the label side up.
Clean DVD disc of dust/dirt.
Close the setup of the DVD player.
Check that the disc or file is compatible with the unit.

Remote Control does not work

Aim the Remote Control towards the sensor on the front panel of the DVD player.
Use the Remote Control closer to the DVD player.
Check the battery level of the batteries and replace if necessary.

Support
If you require further assistance with your new DVD player, please contact our support team on the Oakcastle website: www.oakcastle.co.uk

Specification & Warranty

Specifications

Power Supply - AC Power Input AC 100-240V
50-60 Hz
O.5A Max
Power Supply - DC Power Output 5.OV 1.2A
Compatible Connections HDMI
A/V RCA Output
USB Input (Y Pb/Cb Pr/Cr)
R/L/Video
Compatible Formats Video Disc: DVD, DVD+R, DVD-R, DVD+RW, DVD-RW
Audio/Photo Disc: CD, CD-MP3, CD+RW, CD-R
Product Dimensions (WxHxD) 20 x 4.2 x 22.5 cm
562g
Regions Supported Multi-region
FCC no. LCS201222140AE

Warranty
All products come with a standard 12 month warranty.
All items must be registered on www.oakcastle.co.uk for the warranty to be valid. Once on the web page, use the menu to find "register your product". You will also be given the chance to extend your warranty for an additional 24 months, free of charge.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download MAJORITY Oakcastle DVD100 - DVD Player Manual

Advertisement

Need help?

Need help?

Do you have a question about the Oakcastle DVD100 and is the answer not in the manual?

Questions and answers

Related Manuals for MAJORITY Oakcastle DVD100

Save Article as PDF

Table of Contents