Gabb Watch 3 - Smart Watch Manual

About Your Watch

• Front
  
  NOTES:
  • Devices and software are constantly evolving. The screen images and icons you see here are for reference only.
• Back
  

Getting Started

Charging the Gabb Watch 3 Wirelessly

Your watch is charged wirelessly, without inserting the cable into the device.

1. You should use a 5V/1A or 5V/1000mA charging block with your magnetic wireless charger. The charging block that came with your Gabb Watch and Gabb Watch 2 is 5V/1000mA and can be used with the Gabb Watch 3 magnetic wireless charger.
2. Place your watch on the wireless charging cable. Align the back of your watch with the top side of the wireless charger.
3. Check the charging icon on your watch to verify that your watch is charging.
   
4. You should see the fully charged status on the screen of your watch when it is 100% charged.
   

NOTES:

• Only use the supplied wireless charging cable for optimal charging performance.
• To avoid interference, do NOT place any object between the watch and the wireless charging cable.
• If you don't see the charging icon appear on your watch after you place it on the wireless charging cable, contact customer support for help.

Turning Your Watch On/Off

Power on: To power your watch on, press and hold the power button until the logo shows up and enters the Home Screen.

Power off: To power it off, press and hold the power button again until you see "Power off?" on the screen. Tap to turn off your watch.

Setting Up Your Watch

1. Activation
2. Download MyGabb App
3. Pair Device to MyGabb App
4. Create Child Gabb ID
5. Connect to Wi-Fi Network
6. Assign Safe Zones

Activation

To activate your Gabb Watch 3, please go to www.gabb.com/activate.

Download the MyGabb App on Parent's Smartphone

To complete the device setup, make sure you have access to a reliable wireless network.
Then, follow the instructions below to pair your watch with the app.

1. Download the MyGabb App on your phone. If your phone runs on Android, download the app from the Google Play Store; if your phone runs on iOS, download the app from the Apple App Store (data usage may apply). The app is necessary to pair with the watch to set up GPS location tracking, SOS functionality and more.
   

2. Open the app and log in with the same email and password you used to place your order on www.gabb.com
3. Tap Add Device .
4. Follow the instructions on the app like filling out your child's information - the child that will be using the device.
5. Turn on Gabb Watch 3 (it may take a few minutes to initialize; really make sure you're in a high cell service area).
   

Pair Device to MyGabb App

Follow the steps below to pair your device to MyGabb App.
While you are in the parent MyGabb App, it is time to pair the watch to MyGabb App.

1. Ensure Bluetooth is enabled on your parent smartphone.
   
2. Once the MyGabb app detects the watch via Bluetooth, select your Gabb Watch 3.
   
3. Click "Confirm and Connect".
   
4. Once your device is connected, click "Next".

Create Child Gabb ID

You will need to create a Child Gabb ID for your child's watch during the onboarding process. This will automatically log your child into Gabb ID on their watch once pairing is complete.
This is a NEW login specifically for your child and is NOT the same thing as your MyGabb app login or your gabb.com login.
A Gabb ID is your child's secure user profile that will allow their settings and more to be backed up in Gabb Cloud and will allow your child's watch to function properly, including the ability to use Speech-to-Text.

1. Click "Create a Child Gabb ID".
   
2. Create a NEW Child Gabb ID username and password, following the credential requirements. This is NOT the same thing as your MyGabb app login or your gabb.com login.
   
3. Creating a Child Gabb ID during the pairing process like this will automatically log your child into Gabb ID on their Gabb Watch 3 once the pairing process is complete.
   

Connect to Wi-Fi Network

Connect your Gabb Watch 3 to your Wi-Fi network in the parent MyGabb App.
Connecting to Wi-Fi helps the watch get more accurate locations and will allow for critical software updates to be performed, including adding new apps to your child's watch.

1. On the MyGabb app, wait for the watch's available Wi-Fi networks to load. This may take 30-60 seconds.
2. Once the Wi-Fi networks have loaded, select the Wi-Fi network you want to connect to.
3. Enter the password for this network.
4. Once you have successfully connected to your Wi-Fi network, click "Next".

Assign Safe Zones

On the MyGabb app during the pairing process, add previously created Safe Zones or create new ones.
Safe Zones alert you when your child enters or leaves a designated area and enable improved GPS locations.

NOTE: You're all paired!

Using Your Watch

Basic Navigation

Your watch is equipped with a touch screen. Swipe left or right to switch pages:

• Watch Face
• Apps
• Settings
• Call History
• Messages
• Contacts

NOTE:

1. Swipe up from the watch face to access Recent apps
2. Swipe down from the watch face to access the Quick menu:
   • Adjust the volume
   • Adjust the screen brightness
   • Turn on/off Wi-Fi
   • Turn on/off Bluetooth
   • Turn on the Flashlight

The Watch Face

The Watch Face is like the Home Screen where you start navigating the device functions.

• Swipe down once to use Quick Setting panel
• Swipe up once to access Recent apps
• Swipe left or right to access Apps, Settings, Contacts, Messages, and Call History.

Adjusting the Volume

Swipe down from the watch face to enter the Quick Menu and then drag the slider to adjust the volume

or

Swipe left twice from the watch face to enter Settings.
Tap to go to the Volume screen. Then drag the slider to adjust the volume.

Making a Call

1. From the watch face, swipe right to the Contacts screen. Then tap the contact you want to call. To start the call, tap and swipe the phone icon.
2. To end the call, tap icon.

NOTE: Your watch can only make and receive calls from phone numbers on the Contact list. You can manage the contacts in the MyGabb App on your phone.

Receiving a Call

When the watch receives a call, it will ring and the screen will show the caller's name.

• Tap to answer the call.
• Tap to reject or end the call.
• To adjust the volume during the call, tap the volume icon.
  

NOTES: Making and receiving calls and messages requires network connection.

Sending a Message

1. From the watch face, swipe right twice to the Message screen. Then tap the contact you want to send a message.
   
2. Choose what you want to send:
   • To send a composed message using a keyboard, a Speech-to-Text message, or a preset message, tap .
   • To send an emoji, tap .
   • To send a voice message, tap .
     

Receiving a Message

When the watch receives a new message, it will appear on the screen.
Tap to reply with a message or to call back.

NOTES: The watch can only exchange messages with contacts whose permission is allowed. You can manage contact permissions with the MyGabb App on your phone.

If your message storage is full, you will receive a message informing your oldest messages will be regularly deleted.
You may also delete messages yourself.
Press and hold for 1 second to select a conversation, and then tap to delete.

Checking Call History

From the watch face, swipe right three times to enter Call History to check your missed call(s), incoming call(s) and outgoing call(s).

Tap on the contact you want to call or send a message.

Turn On/Off Wi-Fi

Swipe down from the watch face to enter the Quick Menu and then tap the Wi-Fi icon.

or

Swipe left twice from the watch face to enter Settings. Scroll down to locate the Wi-Fi setting. Tap to go to the Wi-Fi screen. Then use the toggle switch to turn it on.
Tap to select an available Wi-Fi network. Enter password if required.

Turn On/Off Bluetooth

Swipe down from the watch face to enter the Quick Menu and then tap the Bluetooth icon.

or

Swipe left twice from the watch face to enter Settings. Scroll down to locate the Bluetooth setting.
Tap to go to the Bluetooth screen. Then use the toggle switch to turn it on.
Tap to select a device to pair with.

Fun with Our Apps

Swipe left once to check out our apps, such as Gabb Go, Gabb Move, and Mimic by Gabb.
Note that you must be logged into a Child Gabb ID for some apps to function properly.

	Gabb Go A pet theme game by Gabb
	Mimic by Gabb Test and improve your memory and reflexes
	Gabb Move Select exercise activities and track steps

Settings

Swipe left twice to access full setting and customization options.

	Volume Adjust volume and enable or disable vibration
	Theme Choose theme for your watch
	Watch Orientation Choose Left Wrist or Right Wrist
	Wake Screen Enable or disable Raise to Wake
	Wi-Fi Enable or disable Wi-Fi connections and select available networks
	About Device Display your device information
	Ringtones Set ringtones and message tones
	Wallpaper Choose wallpaper for your watch
	Screen Timeout Set screen timeout
	Gabb ID Sign in, Update Apps, and see your last Gabb Cloud backup
	Bluetooth Enable or disable Bluetooth and pair with available devices
	Update Check for available software updates

Support and More

From the MyGabb app, tap the hamburger menu on the top right and select Support to learn more.
From your computer, visit gabb.com/account to manage your account, track your usage, edit account information, pay your bill and more.
From your computer, visit gabb.com/support, or email us at support@gabb.com.