Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LamasaTech Versi
Summary of Contents for LamasaTech Versi
- Page 1 Versi Indoor Digital Signage Display Installation Manual www.lamasatech.com...
- Page 2 Contents Package Contents Tools Required Instructions Troubleshooting...
-
Page 3: Package Contents
Package Contents... - Page 4 Contents For each Versi display you have ordered you will have 1 box. The boxes will contain the following contents. Security Covers (2) Remote Control WiFi Aerial Versi Power Display Cable Screws Wall Mount Wall Brackets (2) Wall screws and...
- Page 5 Adapters for brackets to allow the screen to mount in Portrait orientation.
-
Page 6: Tools Required
Tools Required... - Page 7 Tools Required Tools that may be required during your installation are listed below. Phillips Screwdriver Power Drill Spirit Level...
- Page 8 Instructions...
- Page 9 Instructions Lay the display down on a soft flat surface, ensuring the protection of the screen. Then remove the security covers. Next, line up and screw the wall brackets to the back of the screen. Depending on your preference for having the screen in landscape or portrait orientation, this will determine how you secure the brackets to the back of the display.
- Page 10 Alternatively, to mount the display in portrait orientation, you must screw in the adapters as shown below in green. The adapters need to be Adapters in position secured before the bracket is secured If you are adding your own NUC PC, you should install it now. Mount it using a mini PC VESA bracket, where the display has VESA mounting holes in the shape of an X, as shown in the image below indicated in green.
- Page 11 You will then need to mark where your display will be fixed. Using your mount and spirit level, carefully mark the points where you will drill your holes. Once done, drill holes into your wall. NOTE: The fixings provided are for solid walls. If you choose to mount to plasterboard, you will need to arrange for your own fixings.
- Page 12 Now pick your screen up and attach any cabling that is required. After doing so, reattach the security covers. A second person could be helpful at this stage. Now attach the tightening screw (highlighted in the picture below) to the brackets on the screen and hook the screen into place.
-
Page 13: Troubleshooting
Troubleshooting... - Page 14 Ensure the Wi-Fi network supports 2.4Ghz Display doesn’t Android OS issue, generally a firmware upgrade boot or hangs on required please contact the LamasaTech LamasaTech Logo Customer Success Team. No Display/black Check if you have a backlight as this may be a...
- Page 15 Check time zone in display settings as this can loading from CMS prevent signage applications running correctly application Display doesn’t Android OS issue, generally a firmware upgrade boot or hangs on required please contact the LamasaTech Customer LamasaTech logo Success Team.
-
Page 16: Contact Technical Support
Contact technical support cs@lamasatech.com UK: +44 (0) 191 622 0725 US: +1 (805) 308-9623 www.lamasatech.com...
Need help?
Do you have a question about the Versi and is the answer not in the manual?
Questions and answers