Maintenance Minder - Honda CLARITY PLUG-IN HYBRID 2019 Owner's Manual

MAINTENANCE

Maintenance Minder

Reminds you when indicated maintenance service is due.
When maintenance is due, the system message indicator comes on and a
message appears on the driver information interface every time you turn the
vehicle on.
1. Press the Display/Information button.
2. Press the t/u buttons to select the wrench icon and press enter.
3. Press and hold the Enter button for about 10 seconds to enter reset mode.
4. Press the p/q buttons to select the maintenance item to reset or select All
Due Items (you may also select cancel to end the process).
5. Press the Enter button to reset the selected item and repeat step 4 to reset
any other items.
/ Button
ENTER Button
All maintenance services should be performed in accordance with the intervals
indicated by the driver information interface.
U.S. models
Maintenance, replacement, or repair of emissions control devices and
systems may be done by any automotive repair establishment or individuals
using parts that are certified to EPA standards.
According to state and federal regulations, failure to perform maintenance
on the maintenance main items marked with # will not void your emissions
warranties. However, all maintenance services should be performed in
accordance with the intervals indicated by the display.
134 |
™
Button
Maintenance Item Code(s)