Pentax Optio S50 Connection Manual page 17

OS Status for USB connection
Windows XP Recognized as PENTAX Optio
S50, but cannot read images
when trying to acquire them.
Windows 2000 "Found New Hardware Wizard" is
displayed.
Windows Me "Found New Hardware Wizard" is
displayed.
The i-Photo function starts, but the
MacOS 10.3 image cannot be identified.
Nothing is displayed on the camera
MacOS 10.2 and your Macintosh computer.
"Print error" is displayed on the
MacOS 10.1 camera's LCD monitor.
The message "Software needed for
the USB device "Unnamed device" is
not available. Would you like to look
MacOS 9.2
for the software on the internet?"
appears on your Macintosh
computer.
Follow this instruction
Turn off the camera and remove the
USB cable from your PC.
Click "Cancel", turn off the camera and
remove the USB cable from your PC.
Click "Cancel", turn off the camera and
remove the USB cable from your PC.
Turn off the camera and remove the
USB cable from your Macintosh
computer.
Turn off the camera and remove the
USB cable from your Macintosh
computer.
Turn off the camera and remove the
USB cable from your Macintosh
computer.
Click "Cancel", turn off the camera and
remove the USB cable from your
Macintosh computer.
15