English BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF85M Congratulations! EC‑Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Brushless Cordless Compact Impact Driver DCF85M...
English refrigerators. There is an increased risk of electric shock if will do the job better and safer at the rate for which it your body is earthed or grounded. was designed. c ) Do not expose power tools to rain or wet conditions. b ) Do not use the power tool if the switch does not turn Water entering a power tool will increase the risk of it on and off.
English f ) Do not expose a battery pack or tool to fire or • Connect the brown lead to the live terminal in the plug. excessive temperature. Exposure to fire or temperature • Connect the blue lead to the neutral terminal. above 130 °C may cause explosion.
English Do not use an extension cord unless it is absolutely • Indicators necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution. Stage 1 Charging Do not place any object on top of charger or place •...
English exposed. Align the slots on the back of the charger with the damaged in any way (i.e., pierced with a nail, hit with exposed screws and fully engage them in the slots. a hammer, stepped on). Electric shock or electrocution may result.
English Transporting the FlEXVOlT Battery Have defective cords replaced immediately. WALT FLEXVOLT® battery has two modes: Use The D and Transport. Use Mode: When the FLEXVOLT battery stands alone or is in Charge only between 4 ˚C and 40 ˚C. WALT 18V product, it will operate as an 18V battery. When the FLEXVOLT battery is in a 54V or a 108V (two 54V batteries) Only for indoor use.
English To Remove the Battery Pack from the Tool Visible radiation. Do not stare into light. 1. Press the battery release button 5 and firmly pull the battery pack out of the tool handle. Date Code Position (Fig. B) 2. Insert battery pack into the charger as described in the The production date code 13 ...
Page 13
English Proper Hand Position (Fig. A, C) applications, before hesitating as the screw head reaches the workpiece, and then (if required) start a slow controlled impact WARNING: To reduce the risk of serious personal injury, to ensure the head ends perfectly flush. ALWAYS use proper hand position as shown. nOTE: This mode is for light duty screwdriving applications.
English MAINTENANCE • Run the battery pack down completely, then remove it from the tool. Your power tool has been designed to operate over a long • Li-Ion cells are recyclable. Take them to your dealer or a period of time with a minimum of maintenance. Continuous local recycling station.
Need help?
Do you have a question about the DCF85MP2T and is the answer not in the manual?
Questions and answers