Panasonic Viera TH-42PX600 Operating Instructions Manual page 37

Connecting this unit to a DVD recorder and AV amp
When using an "Control with HDMI" audio-video amplifier and a compatible DIGA recorder, use a daisy chain
connection as shown below.
Optic fiber
Digital audio input
(Optic)
•
One AV amp and one
DIGA recorder can be
operated with this unit.
•
Be sure to connect the AV
amp between this unit and
the DIGA recorder.
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 34).
Note
•
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
•
When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this
unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
Note
•
HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode
to HDMI 2 (p. 29) initially before connecting to
HDMI 2. After connection, confirm the HDMI
HDMI cable
control functions (p. 34-35).
HDMI HDMI
(AV OUT) (AV IN)
Panasonic AV amp
HDMI cable
HDMI
(AV OUT)
DIGA (Panasonic DVD Recorder)
37