If an overtemperature alarm is triggered, take the stored components out of the drawers. Check their condition before re-using them. If the device is faulty, do not use the Barkey warming center II. Make a note of the error code, switch the Barkey warming center II off, disconnect it from the power supply and inform a service technician.
Guidelines and manufacturers declaration - Electromagnetic emission The Barkey warming center II is intended for operation in one of the environments listed be- low. The customer or user of the Barkey warming center II must ensure that it is operated in one of these environments.
The Barkey warming center II is intended for use as a fixed installation inside buildings. Mobile use in vehicles is not permitted. The Barkey warming center II must be set up on a stable, solid and level surface. Unob- structed, simple operation of the device from above and in front must be guaranteed.
► Turn the Barkey warming center II round so that you can easily reach the rear of the device. ► Connect the low-power socket on the mains power cable provided to the low-power plug on the Barkey warming center II.
Page 33
Perform this check carefully. As long as the mains voltage is present, the Barkey warming center II is now in operating mode. The status indicator lights up "green". The current air temperature in the heating cabinet and the activity of the heating are displayed in the display.
The Barkey warming center II can optionally be equipped with a back-up battery. This can be useful if the Barkey warming center II has to be moved to the nursing station or other location in order to be loaded with goods to be warmed or in order to distribute such goods.
Need help?
Do you have a question about the Warming center II and is the answer not in the manual?
Questions and answers