Operating Peripheral Equipment - Panasonic Viera TC-23LX60 Operating Instructions Manual

Operating Peripheral Equipment

You can operate other manufacturers' equipment using this TV's remote control.
Caution
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
This procedure searches all codes and is called the "sequence method."
After step
test
change
Operate the equipment with the
remote control (p. 22)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
18
1
Connect the external equipment to the TV and
Power Off the external equipment
2
3
4
5
To find a code not listed in the code list
above, change the code and
Press both buttons simultaneously
+
for more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
Input the equipment's 4-digit remote
control code
Operate the equipment with the
remote control
•
The external equipment turns On.
■
If the equipment does not operate with
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with
When the correct code is found
(p. 23-24)
(p. 22)
above and test again
store