AT&T Bell System Plant Series Test Instructions

•
•
•
•
•
•
•
BELL SYSTEM PR~c::TICES
Plant Series
REPLACING PAGE ADDENDUM
FUlng lnatructiona:
t. IEIIIM nOII THE SECTION THE PACES NUIIIEIED THE SAME
AS THOSE ATIACHED TO THIS PINI SHEET.
2. INSERT THE ATIACIID PAIES INTO THE SECTION IN THEIi PUCE.
. 3. PLACE THIS PINI SHEET AHEAD OF PAIE 1 OF THE SECTION.
·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•••·•·•·•·•·•·•·•·
..
·•·•·•·•·•·•·•·•·•·•·•·•·•·•·•·
KS-19602 L 1 AMPLIFIER
TESTS
ADDENDUM 024-178-500
Issue 1, March 1969
AT & TCo Standard
1. GENERAL
1.002
This addendum is issued to revise the
KS-19602 Ll Amplifier, Schematic Diagram.
1.001
This addendum supplements Section
024-178-500, Issue 1. The attached page
must be inserted in the Section in accordance with
the filing instructions above.
Attached:
Page 5, February 1969, revised
The following change applies to Part 1 of
the Section:
(a) Fig. 6-Revised
© American Telephone and Telegraph Company, 1965, 1969
Printed in U.S.A.
Page 1
1 Page and Attachment