Lifemax 2300 Operating Instructions

Big Digit Clock with
Vibration Alarm Pad
Thank you for purchasing a Lifemax Big Digit Clock with Vibration Alarm Pad. Ideal for the hard of hearing, your
clock offers an alarm with the choice of sound, vibration or both and is powered by battery of USB. Featuring
large, clear white numbers on a black your clock displays the time, date and temperature and oiffers 3 alarm
options with a a strong vibration motor. To help you get many years of use from this product we recommend
you read this document thoroughly to familiarise yourself with how your product works.
Figure 1
1) ALARM
2) MODE
3) SNOOZE
4) UP/DOWN
5) VIBRATION PAD
Operating Instructions
If you wish to use the vibration alarm, please insert the USB plug at the end of the vibration pad lead into the
square USB socket on the rear of the Big Digit Clock. The vibration puck should be placed under your pillow
taking care that the trailing lead is positioned so as not to pose any risk of entanglement or trip hazard.
Your Big Digit Clock can be powered by USB or 3 x AAA batteries. To power by USB attach the round connector
on the lead provided to the round hole on the back of the unit. To power by batteries:
1. Locate the battery compartment cover on the rear of the unit and gently pull back on the tab securing the
battery compartment cover in place to allow removal of the cover.
2. Insert three AAA batteries as indicated inside the compartment, observing the correct polarity (+/-).
3. Replace the battery compartment cover and close firmly . You will hear a click when the cover is secured.
When first switching on the LED display will fully illuminate for 2 seconds and a sound will be heard. The clock
will then enter normal time mode displaying 0:00 in 24hr format. Pressing the MODE button will cycle through
the clock functions:
Setting the time
1. With the clock showing the the time, press and hold the MODE button for 3 seconds.
2. Choose between 12/24 hour clock modes by pressing UP and confirm by pressing MODE. In 12 hour mode,
PM is displayed after midday.
3. Set the hour by pressing UP or DOWN, taking care when in 12 hour mode to correctly choose between AM
and PM. Press MODE to confirm.
4. Set the minute by pressing UP or DOWN and confirm by pressing MODE.
5. The clock will exit the setting mode after completing step 4 or if left untouched for 10 seconds.
Setting the date
1. Press MODE until the date is displayed (default 01/01/2018) and then press and hold MODE for 3 seconds.
2. Choose the year by pressing UP or DOWN and confirm by pressing MODE.
3. Set the month by pressing UP or DOWN and confirm by pressing MODE.
4. Set the day by pressing UP or DOWN and confirm by pressing MODE.
5. The clock will exit the setting mode after completing step 4 or if left untouched for 10 seconds.
5
TIME DATE
1
TEMPERATURE
2
3
4
NIGHT MODE
SKU: 2300