Ava GJD GJD1210 Installation Manual

LX SPEAKER
®
GJD1210 LoRa LX Speaker 868 MHz
Installation Guide
PACKAGE CONTENTS
•
1 x LoRa LX Speaker 868 MHz
•
1 x Mounting bracket
•
1 x Installation guide
•
2 x Bolts
The LoRa LX Speaker is controlled and triggered via
the LoRa LX Gateway interface.
Four individual messages can be recorded on to the
LoRa Speaker which can be individually triggered
via the LoRa Gateway interface.
Opening the Speaker
Carefully remove the front grill by pulling forwards.
Unscrew the four corner screws and part the front of
the speaker from the base. There are wire
connections between the front and rear.
Powering the Speaker
The 12 volt supply to the speaker is made using the
+ red and - black terminals on the rear of the
speaker.
Transfer Unique ID Code from the Speaker to the
Gateway
Power the LoRa LX Speaker.
LX Gateway to 'Device Learn' (see
®
Set the LoRa
®
LoRa LX Gateway manual) then press and release
the speaker's 'pair' button.
Fixing the Speaker to the Wall
Protect against water during installation.
Fix the mounting bracket to the wall and secure the
speaker to the bracket with the two bolts.
Recording the Messages
Recordings can be made using the on-board
microphone or alternatively by a 1 V p-p line
input using the phono socket. Place the jumper across
the two 'microphone' pins to select the on-board
microphone. Remove the 'microphone' jumper to
select line input.
To Record an Individual 30 Second Message -
Press and hold the 'RECORD' button first then press
and hold the selected channel button 1, 2, 3 or 4.
The green indicator will light.
w: www.gjd.co.uk
Unit 2, Birch Business Park, Whittle Lane, Heywood, Greater Manchester, OL10 2SX, UK
See Figure 1
Record the message for that channel then release
the 'RECORD' button. The recording will stop when
the button is released, or the 30 second time
allowance is reached.
When the recording is completed, the message is
played back automatically.
To Playback the Recording of Each Channel -
Press and release the selected channel button
or
The volume level can be adjusted using the
potentiometer on the PCB.
Specifications
t: +44 (0) 1706 363 998
4.
Supply voltage
Supply current max
Audio output
External audio input:
Operating temperature
Protection
Colour
Dimensions
Weight
Housing
Communication
e: sales@gjd.co.uk
1, 2, 3
9 to 15 VDC
500 mA
1 Watt
1V p-p maximum (jumper
selectable)
o o
-20 C to +55 C
IP44
Black or white
190mm x 150mm x 150mm
1.9 kg
High impact ABS
®
LoRa 868MHz
Bi-directional protocol