Page 1
SPEAKER QUICK SETUP GUIDE AVA SPEAKER A1 AVA SPEAKER P1 AVA SPEAKER B1 AVA-SX1 QSG RO REV3...
Page 3
Stereo Audio Zone - Two A1 speak- ers paired wirelessly, or an A1 and P1 speaker connected by wire. Full Audio Zone - A Stereo Zone plus a B1 bass module, providing optimal studio audio.
The center LED flashes green while booting. Wait for 45 seconds. 2. When the speaker is turned on, the center LED blinks orange to indicate no network connection. DOWNLOAD THE APP or visit ava.com/app Download and open the AVA App on your Mobile Device. 2. Follow the on-screen instructions.
Page 6
CONNECT TO WIFI OPTION A To connect the speaker to a home’s Wi-Fi network, you use the AVA mobile app while connected to a temporary Wi-Fi network on the A1 speaker. 5 sec Activate the A1 speaker’s temporary Wi-Fi network by holding the and ➕ button for 5 seconds.
Page 7
3. The A1 speaker is connected to the network when the center LED turns solid green. 4. In the AVA mobile app, tap ⚙ (upper right) and set a name for the audio zone. System Design Tip: In a system that has more than one audio zone, use the same type of network connection for all primary speakers.
Page 8
Secondary A1 Speaker 8 sec 5 sec Put the primary A1 in pairing mode by holding the and ➖ buttons for about 8 seconds. A double-ping sound chimes from the speaker. 2. Put the secondary A1 in pairing mode by holding the and ➖ buttons for about 5 seconds.
Page 9
The A1 primary speaker detects the P1 secondary at startup. After connecting a P1 to an A1, you must turn off the A1 and then turn it back on. Connect the A1 to the P1 using the 3m speaker cable that is included with the P1 speaker.
Page 10
2. Connect the B1 to power and turn the power switch on. 3. Wait for the B1’s status LED to turn green. 4. Put the primary A1 in pairing mode by holding the and ➖ buttons for 8 seconds. A double-ping sound chimes from the speaker.
Need help?
Do you have a question about the A1 and is the answer not in the manual?
Questions and answers