Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Conmec CPV Series
Summary of Contents for Conmec CPV Series
- Page 1 Operator's Manual Backpack Petrol Concrete Vibrator CPV Series...
-
Page 2: Foreword
Foreword This manual contains important instructions for this machine. These instructions must be followed during installation, operation, and maintenance of the machines. This manual provides information and procedures to safely operate. For your own safety and to reduce the risk of injury, carefully read, understand, and observe all instructions described in this manual. -
Page 3: Table Of Contents
Table of Contents Foreword Warranty INTRODUCTION POWER UNIT CHARACTERISTICS CHARACTERISTICS OF FLEXIBLE SHAFT AND POKERS GENERAL AND SPECIFIC SAFETY RULES 4.1 WORK AREA 4.2 PERSONAL SAFETY 4.3 TOOL USE AND CARE 4.4 SERVICE 4.5 SPECIFIC SAFETY RULES USAGE CONDITIONS OPERATION AND MAINTENANCE 6.1 BEFORE START 6.2 GETTING STARTED 6.3 SHAFT CONECTION TO POWER UNIT... -
Page 4: Introduction
1 INTRODUCTION Thank you for trusting the CONMEC brand. For the maximum performance of the equipment, we recommend to read carefully the safety recommendations, maintenance, and usage listed in this manual Defective parts should be replaced immediately to avoid major problems. -
Page 5: Characteristics Of Flexible Shaft And Pokers
CHARACTERISTICS OF FLEXIBLE SHAFT AND POKERS SCOPE The flexible shaft connected to the power unit sends the movement to an eccentric placed in the poker, and so it is produced the vibration for the compacting of the concrete. DIAMETRE LENGTH WEIGHT CENTRIFUGAL FREQUEN... -
Page 6: Tool Use And Care
4.3 TOOL USE AND CARE DO NOT FORCE tool. USE the correct tool for your application. DO NOT USE tool if switch does not turn it on or off. STOP the machine before making any adjustments, changing accessories, or storing the tool. STORE idle tools out of reach of children and other untrained persons. -
Page 7: Usage Conditions
5 USAGE CONDITIONS For your own safety, as protection for others, and to avoid damage to the equipment, read carefully the usage recommendations. 1. Before working, to be sure the hose joint nut is fastened to the motor (screwed to left). 2. -
Page 8: Poker Connection To Flexible Shaft
6.4 POKER CONNECTION TO FLEXIBLE SHAFT The flexible shafts are intended to connect the pokers: CPVP40. Allowing to interchange of a poker to other quickly and without a special tool. CONNECTION PROCEDURE: 1. Introduce the hexagonal driver of the poker in the shaft. 2. -
Page 9: Periodic Maintenance Of Flexible Shaft And Pokers
Every 12 months or more frequently, the screed has to be sent to an authorized workshop for service according to the intensity of the usage. Do not fill the fuel tank while smoking or near any other potential source of danger. Lock the petrol admission key when filling, use unleaded gas, clean the gas spelt. -
Page 10: Storage
8.3 STORAGE When the machine is not going to be used for long periods of time, it should always be stored in clean, dry, and protected area. 8.4 TRANSPORTATION When transporting by vehicles, ensure the machine is safe against slipping, overturning and blows. LOCATING MALFUNCTIONS 9.1 LOCATING MALFUNCTIONS OF PETROL ENGINE PROBLEM... -
Page 11: Recomendations Of Use Of Concrete Vibrator
RECOMENDATIONS OF USE OF CONCRETE VIBRATOR 1. Choose the type of vibrator adequate to the dimensions of the structure to vibrate, the distance among the reinforcement and the slump cone. It is recommendable to have an additional concrete vibrator. 2. Before starting check that the concrete vibrator is in good use and it works correctly. Use the means of safety and protection. - Page 12 CONMEC ENGINEERING CO., LTD Add: No.88, 2# Industrial Avenue, An Wu Road, Wu Qiao County, Feng Xian, Shanghai, P.R.C Tel: 86 (0)21 57407318 Fax: 86 (0)21 57406955 E-mail: sales@conmec.cn www.conmec.cn Version: 201801-01...
Need help?
Do you have a question about the CPV Series and is the answer not in the manual?
Questions and answers