Panasonic HDC-TM80 Operating Instructions Manual page 129

Problem
When connected by the
USB cable, this unit is
not detected by the other
devices.
VIERA Link does not
work.
The power of the DVD
burner cannot be turned
on.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
When this unit is
connected to a TV in still
picture recording mode,
the picture on the TV
may appear grainy.
Problem
When connected by the
USB cable, this unit is
not detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
With other products
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
(Setting on this unit)
≥ Connect with a HDMI mini cable (optional). (l 93)
≥ Touch [MENU], then touch [SETUP] # [VIERA Link] #
[ON]. (l 93)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
≥ When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
≥ Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
≥ This is not a malfunction and does not affect the still
pictures being recorded or played back.
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 111, 120)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
Check points
Check points
129
VQT3J26