Advertisement
Quick Links
Advertisement
Related Manuals for Seura ARTISAN RILEY
Summary of Contents for Seura ARTISAN RILEY
- Page 1 USER MANUAL ARTISAN COLLECTION RILEY LIGHTED MIRROR PROFESSIONAL INSTALL ATION RECOMMENDED WARRANTY REGISTRATION REGISTER FOR EXTRA BENEFITS Activate within 30 days of purchase: seura.com/activate 1-800-957-3872 1230 ONTARIO ROAD, GREEN BAY, WI 54311 W W W. SEUR A .COM...
- Page 2 Thank you for selecting a Séura Lighted Mirror. Please read this guide before beginning installation. Carefully remove and inspect the unit for possible damage that occurred during shipping. If there is damage, please call Séura at How to properly store the unit until installation 1-800-957-3872.
-
Page 3: Parts Included
WARRANTY REGISTRATION REGISTER FOR EXTRA BENEFITS Activate within 30 days of purchase: seura.com/activate A: M6 x 35 mm A: M6 x 35 mm A: M6 x 35 mm A: M6 x 35 mm A: M6 x 35 mm... -
Page 4: Installation
Installation IMPORTANT: TURN OFF MAIN POWER TO THE INSTALLATION LOCATION AT THE CIRCUIT BREAKER. Step 1: Prepare proper wiring and wall switch. • Turn off the main power before installing the fixture in order to prevent possible electric shock. Locate the circuit breaker control for the room where you’ll be working and switch the circuit to off. - Page 5 Step 2: Map out the installation area and mount the lighted mirror housing to the wall. • Align the mirror housing on the wall. Using the keyhole at the top center, mark and drill the hole. If mounting on drywall, insert the provided wall anchors using a hammer.
- Page 6 • After securing the mirror housing to the wall with a screw, mark the outermost hole in each corner. Next, remove the mirror housing and drill holes for the provided wall anchors. Install the wall anchors, then rehang the mirror housing and secure it by screwing in all the corners.
- Page 7 Step 3: Make wiring connections. Wiring Fixture Disconnect • Séura lighted mirrors are equipped with an easy-to-install Wiring connections made by wiring fixture disconnect that can be found on the mirror the manufacturer housing that is now connected to the wall. Refer to your Field wire connector included drawing package to identify the location of the Connections to be made by...
- Page 8 Step 4: Hang the mirror • Hang the mirror onto the housing by positioning the mounting brackets on the back of the mirror so they rest on top of the brackets on the housing. Start by holding the mirror slightly higher than the housing and slowly lower the mirror until the mirror brackets rest on the housing brackets.
-
Page 9: Care And Maintenance
Care and Maintenance Séura’s mirror glass coatings have been developed to protect the mirror surface and allow easy maintenance. Please follow the guidelines listed for proper mirror care and cleaning: • The glass surface should be cleaned with any conventional non-ammoniated glass cleaner.
Need help?
Do you have a question about the ARTISAN RILEY and is the answer not in the manual?
Questions and answers