Optoma HD71 User Manual page 30

User Controls
"SuperWide" is

"Off" as default.
H ow to use "Super-

Wide"
1 . Use a 2.0:1 screen
that buy from Op-
toma
2. Enable Super-
Wide feature to
Auto
3. Use zoom ring in
top of projector to fit
the image width to
the screen width
30
English
Display
V Image Shift
Shift the projected image position vertically.
V Keystone
Press the or to adjust image distortion vertically and makes a
squarer image.
PC Mode
This Mode is only for use when using this projector unit with a PC
signal, either Analogue connector.
Wide: If your PC output is a wide screen format resolution, you

must select this setting.
Examples of Wide screen resolutions are: 1280 x 720 / 1920 x
1080.
Normal: If your PC output is a Normal (4:3) resolution you

must select this setting.
Examples of Normal resolutions are: 640 x 480 / 800 x 600 /
1024 x 768 / 1152 x 864 / 1280 x 1024 / 1400 x 1050.
* All supported resolutions are
SuperWide
Off: The format can be chosen your desired aspect ratio includ-

ing 4:3, 16:9, LBX and Native.
On: The format only can be chosen 4:3 and 16:9.

Auto: To solve the differences of the film formats, the option

can keep the format in the same ratio.
listed on pages 46-47.