Olympus CAMEDIA E-20 Reference Manual page 196

Appendix 2: Troubleshooting (continued)
The monitor and viewfinder displays are different.
Problem
Did you press the monitor button
Is the mode dial set for playback
reserve mode , or setup/connection mode
?
Did you put the camera in playback mode by
pressing the monitor button
Something other than lines displayed in the
control panel? Cannot operate the camera?
Cannot play back images on the monitor.
Problem
"NO CARD" is displayed in the monitor?
"NO PICTURE" is displayed in the monitor?
Mode dial set to playback
mode dial set to P, A, S, or M, did you
rapidly press the monitor button
Something other than lines displayed in the
control panel? Cannot operate the camera?
194
? Press the monitor button
the monitor.
Set the mode dial to P, A, S, or M.
, print
In the playback mode, the played back image
twice? is displayed for viewing. Press the monitor
button
shooting mode.
See "Cannot operate the camera, monitor and
control panel blank."
No card is installed in the camera. Insert a
card.
There are no pictures stored on the card.
Make sure that a card that contains images
is inserted, or take a picture.
? Or with Set the mode dial to playback
setting the mode dial to P, A, S, or M rapidly
twice? press the monitor button
See "Cannot operate the camera, monitor and
control panel blank."
Solution
to switch on
to restore the camera to the
Solution
, or after
twice.
Page
© 35
© 70
© 44
© 192
Page
© 24
© 199
© 44
© 192