marvelTech MHSI-01LP3 User Manual page 58

F05 DC soft start Failure
F06 Tz_Dc_OverCurr_Fault
F07 DC_OverCurr_Failure
F08 AuxPowerBoard_Failure
F09 IGBT_Failure
F11 AC_Main Contactor_Failure
F12 AC_Slave Contactor_Failure
F13 Tz_Ac_OverCurr_Fault
F14 AC_OverCurr_Failure
F15 GFCI_Failure
F16 Tz_COM_OC_Fault
F17 BusUnbalance_Fault
F18 Load_voltage_Fault
F24 Grid_Overload_Fault
F25 Gen_Overload_Fault
1.Please check whether the battery voltage is normal.
2.Please check whether the battery voltage setting value of the device is normal The battery
voltage setting value is between (15 ~ 60) V.
3. Please contact us or battery suppliers if you are alert again.
1.Please check the battery current limit value in the equipment system.
2.Please check whether the PV and battery wiring of the equipment are normal.
3.Cut off all power soure and wait for 2 minutes to discharge the inverter.Open all power
circuit breakers and restart the device.
4.If the restart failed and alarmed again, please contact us.
1.Please check the battery current limit value in the equipment system.
2.Please check whether the PV and battery wiring of the equipment are normal.
3. Cut off all power soure and wait for 2 minutes to discharge the inverter.Open all power
circuit breakers and restart the device.
4. If the restart failed and alarmed again, please contact us.
Restart the equipment, please contact us if you still fail.
Restart the equipment, please contact us if you still fail.
Restart the equipment, please contact us if you still fail.
Restart the equipment, please contact us if you still fail.
1.Please check whether the backup load power is within the range.
2.Restart and check whether it is normal.
3.Seek help from us, if you cannot return to normal.
1.Please check whether the backup load power is within the range.
2.Restart and check whether it is normal.
3.Seek help from us, if you cannot return to normal.
1.Please check the wiring of the equipment and restart after errors.
2.If the restart failed and reported the error again, please contact us.
1.Please check whether the backup load power is within the range.
2. Restart and check whether it is normal.
3.Seek help from us, if you cannot return to normal.
Restart the equipment, please contact us if you still fail.
1.Please check whether the load line wiring is correct.
2.Please check the range of AC voltage.
3.Restart the equipment, please contact us if you still fail.
1.Please check whether the backup load power is within the range.
2.Restart and check whether it is normal.
3.Seek help from us, if you cannot return to normal.
1.Please check whether the backup load power is within the range.
2.Restart and check whether it is normal.
3.Seek help from us, if you cannot return to normal.
54