Table of Contents
Advertisement
Neuros MPEG-4 Recorder
3.7 Using the Neuros MPEG-4 Recorder to record TV
programs using TV itself
1.
Connect the Neuros MPEG-4 Recorder to a television for record-
ing TV programs as described in Section 2.1.3, "Connecting to
a Television for Recording using TV itself" on page 7.
2.
Enter the Player menu as described in Section 3.1, "Accessing
the On Screen Interface" on page 17.
3.
Use TV remote control to set "TV/VIDEO" options of TV to TV
mode. The TV screen will switch the player menu to the broadcast
TV program. Then, select a TV channel program you'd like to
record.
4.
Use TV remote control to set the "TV/VIDEO" options of TV to
VIDEO mode. The TV screen will switch the broadcast TV
program back to player menu again.
5.
From the Player Menu, use the
the Video Record option and use the
selection.
The TV screen can't be displayed normally as shown in below
two figures depending on different record resolution setting.
and
button to confirm your
SIF Mode
44
buttons to highlight
Advertisement
Table of Contents
Need help?
Do you have a question about the MPEG4 Recorder 1 and is the answer not in the manual?