RCD (Residual Current Device). Under no circumstances put a plug on the cable. Failure to comply with these safety instructions will release Buffalo from any responsibility and the warranty will become null and void. • Position on a flat, stable surface.
Page 3
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by a Buffalo agent or a recommended qualified technician in order to avoid a hazard.
• Instruction manual BUFFALO prides itself on quality and service, ensuring that at the time of unpacking the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Connect the unit in accordance with the applicable regulations of your country, federal state, city or local authority. Connect the unit to a standard energy supply network. For a proper electrical connection, adjust the power ratings to the local circumstances and requirements. Equipotential bonding terminal in electrical appliances is to connect exposed metal and conductive parts of electrical devices and other devices in electrical appliances with artificial or natural grounding conductors to reduce potential differences (reduce and prevent the risk of electric shock).
Note: Before first time use, clean all parts well and dry completely. Ensure to place the hob on a solid level surface and set all thermostats to the Off positions. 1. Place the pot with food on the hob. Caution: Never place empty containers on the hot plates after the appliance is on. 2.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Buffalo. Every effort is made to ensure all details are correct at the time of going to press, however, Buffalo reserves the right to change specifications without notice.
Need help?
Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers