NEC NP1000 User Manual page 53

The adjustable ranges for 3D Reform are as follows:
Cornerstone
Keystone
* The following are conditions under which the maximum angle is achived:
• When the standard lens is used
• When the lens shift is set to the center
• When the lens shift is used and yet the image is not displayed in the center of the screen, the adjustable range will
be increased or decreased.
• Image is projected in Wide (Zoom lever)
• Resolution is XGA
Higher resolution than XGA narrows the adjustable range.
• Menu items should be set as follows:
Aspect Ratio ........... 4:3
Screen Type ........... 4:3
• Horizontal and Vertical are adjusted separately.
A combination of both adjustments narrows the adjustable range.
NOTE:
• If the Cornerstone screen is unavailable (grayed), press and hold the 3D REFORM button for a minimum of 2 seconds to reset the
current correction data. The Cornerstone function becomes available.
• Turning on the projector will reset the previous correction setting values and correct distortion anew if the projection angle is
changed from the last use.
If the projection angle is the same as in the last use, the previous correction setting values are retained in the memory.
NOTE: Using 3D Reform correction can cause the image to be slightly blurred because the correction is made electronically.
Horizontal
Max. +/– 35° approx.
Max. +/– 27° approx.
Vertical
Max. +/– 40° approx.
43
4. Convenient Features