NEC NP1000 User Manual page 101

[PC Card]
Profiles (for PC Card):
To execute a wireless LAN easily using Image Express Utility 2.0, select [Easy Connection].
Up to two settings for the optional wireless LAN card can be stored in memory of the projector.
Select [Profile 1] or [Profile 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
DHCP:
Place a check mark to automatically assign an IP address to the projector from your DHCP server.
Clear this check box to register the IP address or subnet mask number obtained from your network administrator.
IP Address ............. Set your IP address. Press
Subnet Mask ......... Set your subnet mask number. Press
Gateway ................ Set the default gateway of the network connected to the projector. Press
and type in 12 numeric characters.
DNS Configuration Type in the IP address of DNS server on the network connected to the projector. Twelve numeric characters
are used.
Advanced .............. Displays the Advanced menu which includes various setting for wireless LAN connection (Network Type
and WEP). See the Advanced menu later on.
Reconnect ............. Use this button to connect the projector to a network.
to display the software keyboard and type in 12 numeric characters.
to display the software keyboard and type in 12 numeric characters.
91
6. Using On-Screen Menu
to display the software keyboard