Motorola MOTO Q User Manual page 51

1 Press and hold the voice key for 2
seconds.
Your phone prompts you to say a
command.
2 Say one of the following commands:
"Call <contact name or phone number>, "
"Send text <contact name>, " "Look up
<contact name>, " or "Open <program
name>. "
Your phone will respond to the request by
making a call, opening a text message
screen, open the contact information for
requested contact, or open the program.
Tip: Speak numbers at a normal speed and
volume, pronouncing each digit distinctly.
Avoid pausing between digits.
Notes:
• Your phone may prompt you to repeat a
name or number. If the name/number
isn't valid, the phone doesn't make the
call.
• If the phone does not recognize the
name or number, the display shows a
list of names/numbers, asks, "Did you
say ..., " and highlights the first item in
the list. Say "Yes" to call the
highlighted number, or "No" to go to
the next list item.
To select the name or number
manually, scroll to the name/number
on the list and press the Select key.
basics 49