Mitsubishi WL-82913 Connections And Maintenance page 73

Edit NetCommand
Name Screen
Figure 10
The Name screen allows you to change the default
name for the A/V Receiver to a custom name of up to
eight characters (including a blank space), selecting
from letters, numbers, and nine different characters.
Using the remote, press ADJUST
each letter, then press ENT(er) to move to the next
position. Press CANCEL to delete the current letter and
move back one character position. When in the first
position, the CANCEL button will return the name to the
default name.
Figure 10. Name screen
Monitor Out to AVR Screen
Figure 11
Use this screen if you connected Audio 2 Out or Audio
Video 1 Out from Monitor Output of the TV to the A/V
Receiver. Select Audio 2 or Audio Video 1 on this screen
and then select the input on the A/V Receiver connected
to Monitor Out.
Figure 11. Monitor Out to AVR screen
® , Adding an A/V Receiver, continued
and to select
Audio 2 is the default selection and allows an analog
VCR to be connected directly to Audio Video 1 out for
recordings. If Audio Video 1 is chosen, then the VCR
must be directly connected to VCR record outputs on the
A/V Receiver.
Finish Screen
Figure 12
To finalize your selections and complete the A/V
Receiver setup, select Finish from the Finish screen
Note: To assign learned inputs to devices, select
the Edit button to display the Edit NetCommand
menu.
Figure 12. Finish screen
25