Related Manuals for REDATOM RED-SPLT-1X2-HDMI
Summary of Contents for REDATOM RED-SPLT-1X2-HDMI
- Page 1 RED-SPLT-1X2-HDMI Product Manual HDMI 2.0 Splitter 1x2 Full 4K60 4:4:4 + Distribution Amplifier www.redatomproducts.com...
- Page 2 The RED-SPLT-1X2-HDMI is an 18Gbps HDMI 2.0b splitter designed for seamless integration between a single input and two display devices. Featuring full 4K60 HDR, High Bit Rate Audio support, EDID and CEC passthrough, the RED-SPLT-1X2-HDMI simplifies the process of adding an additional HDMI display device to your system.
-
Page 3: Panel Descriptions
Panel Descriptions Front Panel: • SERVICE USB input — For service & firmware updates only; Do not use. • HDMI IN input • HDMI LED activity display Light On — Unit has sync with an HDMI source device Light Off — Unit is not synced with an HDMI source device OUT1 Light On —... -
Page 4: Connections And Operations
2. Connect the HDMI from the displays into the RED-SPLT-1X2-HDMI HDMI OUT1 and HDMI OUT2 3. Insert the DC end of the power supply into the RED-SPLT-1X2-HDMI and then plug the AC side of the power supply into the power outlet 4. -
Page 5: Troubleshooting
Troubleshooting No power • Ensure DC power supply is inserted fully and tightened completely No HDMI IN LED • Ensure HDMI cable lengths are less than 10 Meters (~33ft) • Ensure Source Device’s resolution is a maximum of 18Gbps or 4K60 4:2:2/4:4:4 8Bit No HDMI OUT1/2 •... - Page 6 www.redatomproducts.com Questions? Contact us at info@redatomproducts.com...
Need help?
Do you have a question about the RED-SPLT-1X2-HDMI and is the answer not in the manual?
Questions and answers