Subscribe to Our Youtube Channel
Related Manuals for REDATOM RED-SPLT-1X4-HDMI
Summary of Contents for REDATOM RED-SPLT-1X4-HDMI
- Page 1 RED-SPLT-1X4-HDMI Product Manual HDMI 2.0 Splitter 1x4 Full 4K60 4:4:4 + Distribution Amplifier www.redatomproducts.com...
- Page 2 The RED-SPLT-1X4-HDMI is an 18Gbps HDMI 2.0b splitter designed for seamless integration between a single input and four display devices. Featuring full 4K60 HDR, High Bit Rate Audio support, EDID and CEC passthrough, the RED-SPLT-1X4-HDMI simplifies the process of adding an additional HDMI display device to your system.
- Page 3 Panel Descriptions Front Panel: • SERVICE USB input — For service & firmware updates only; Do not use. • HDMI IN input • HDMI LED activity display Light On — Unit has sync with an HDMI source device Light Off — Unit is not synced with an HDMI source device OUT1 Light On —...
- Page 4 2. Connect the HDMI from the displays into the RED-SPLT-1X4-HDMI HDMI OUT1, HDMI OUT2, HDMI OUT3, and HDMI OUT4 3. Insert the DC end of the power supply into the RED-SPLT-1X4-HDMI and then plug the AC side of the power supply into the power outlet 4.
- Page 5 Troubleshooting No power • Ensure DC power supply is inserted fully and tightened completely No HDMI IN LED • Ensure HDMI cable lengths are less than 10 Meters (~33ft) • Ensure Source Device’s resolution is a maximum of 18Gbps or 4K60 4:2:2/4:4:4 8Bit No HDMI OUT1/2/3/4 •...
- Page 6 www.redatomproducts.com Questions? Contact us at info@redatomproducts.com...
Need help?
Do you have a question about the RED-SPLT-1X4-HDMI and is the answer not in the manual?
Questions and answers