Download Print this page

GeoVision GV-POEX0111 Installation Manual

Gigabit waterproof poe extender

Download this manual

GV-POEX0111 Gigabit Waterproof PoE Extender

When using this product for the first time, carefully open the packing box. The packing box should

contain the following items:

➢ GV-POEX0111

➢ Waterproof Connector x 2

➢ Installation Guide

★ Ships locked to the fuselage

Note: Precision devices are built into the device, please handle them carefully to avoid violent

vibration, which may affect the performance of the device. If you find that the equipment is

damaged or any parts are lost in the transportation process, please inform us, and we will give you a

proper solution as soon as possible.

Installation Guide

Packing List

Need help?

Do you have a question about the GV-POEX0111 and is the answer not in the manual?

Page 1 Installation Guide GV-POEX0111 Gigabit Waterproof PoE Extender Packing List When using this product for the first time, carefully open the packing box. The packing box should contain the following items: ➢ GV-POEX0111 ➢ Waterproof Connector x 2 ➢ Installation Guide ★...
Page 2 Chapter 1 Product Introduction 1.1 Product Overview GV-POEX0111 is a gigabit waterproof PoE extender, which provides two 10/100/1000 Mbps RJ-45 ports. The input port is connected to the PSE device, and the output port is connected to the PD device. No configuration is needed; plug and play.
Page 3 3.2 Application Schematic Note the direction of INPUT and OUTPUT in the GV-POEX0111 application schematic. ➢ When using a single extender, connect the INPUT port to the PoE switch and the OUTPUT port to the PD device. This setup can transmit up to 200 m with any switch or single-port PoE adapter compatible with IEEE 802.3af/at, and up to 400 m with GV-APOE switches in CCTV...
Page 4 GV-POEX0111 Figure 3-1 application schematic Note: 1. We do not recommend connecting other GV or third-party PoE extenders in series with the GV-POEX0111. This figure, based on using UTP Cat 5e or Cat 6 cable as an example, shows that the maximum distance from the switch port to the terminal PD is 800 m.