Related Manuals for Unimac IW1200
Summary of Contents for Unimac IW1200
- Page 1 Digital Impact Wrench User Manual RETAIN THIS MANUAL FOR FUTURE REFERENCE PLEASE READ THIS MANUAL CAREFULLY BEFORE USE...
-
Page 2: Table Of Contents
Digital Impact Wrench Table of Contents PARTS LIST ..........................1 SPECIFICATIONS ........................2 SYMBOLS ............................ 3 SAFETY INSTRUCTIONS ......................5 Special Warnings When Using This Tool ................7 GETTING STARTED ........................9 Unpacking ..........................9 Inserting and Removing a Socket ................... 9 Switch ............................. -
Page 3: Parts List
Digital Impact Wrench Parts List 1. Chuck 1/2” 2. Switch 3. Handle 4. Power cable 5. Motor housing 6. Carbon Brush compartment 7. LCD screen Figure 1... -
Page 4: Specifications
Digital Impact Wrench Specifications Description Impact Wrench Model / Type IW1200 Power 240V ~ 50Hz Motor 1050W Protection Class No load speed no. 2200 min Torque: Tightening [F] / Loosening [R] 150 – 350Nm / 500Nm Square chuck ½” Sound pressure level (L... -
Page 5: Symbols
Digital Impact Wrench Symbols Do not expose to weather conditions (ex. storm, rain, snow, etc.) or moisture. Do not use in damp or wet areas. Caution! Risk of injury and/or damage and/or deterioration of the tool in case of non-compliance to safety requirements. Read the instructions manual. - Page 6 Digital Impact Wrench Do not dispose this tool with household rubbish. Dispose this tool in the nearest recycling centre. Please contact your local authority or local recycling centre for further information for its safe disposal.
-
Page 7: Safety Instructions
Digital Impact Wrench Safety Instructions Before using this tool, read and understand all safety instructions. Always follow the safety instructions to minimise risk of damage to property, and to minimize any risk of damages and injuries to persons and animals. READ ALL THE INFORMATION BEFORE OPERATING THE TOOL. - Page 8 Digital Impact Wrench 9. Use protective equipment − Wear protective equipment appropriate to the working conditions and work environment − Wear protective helmet, safety goggles, ear mufflers, face or dust mask, rubber gloves and non-skid footwear to reduce the risk of personal injury when using the tool. 10.
-
Page 9: Special Warnings When Using This Tool
Digital Impact Wrench 20. Defective switches or other part that are damaged should be properly repaired or replaced by an authorized service centre. Do not use the tool if the switch does not turn on or off. 21. Warning − The use of any accessories or attachments, other than those recommended in this instruction manual, may present a risk of injury to persons or animals and may cause damages. - Page 10 Digital Impact Wrench A barrier guard shall be provided to prevent inadvertent contact with the moving parts. 12. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool's construction and design: a.
-
Page 11: Getting Started
Digital Impact Wrench Getting Started Before any intervention on the tool, ensure that the tool is disconnected from its power source. Unpacking • Remove the tool from its packaging. • Check if the tool and accessories are not damaged. Inserting and Removing a Socket To install a socket on the anvil (Figure 2): •... -
Page 12: Operation
Digital Impact Wrench Operation Intended Use • This tool is intended for domestic use only. • This tool is intended for forward and reverse screwing (e.g. changing wheels, exhaust pipe, shock absorbers, lawnmowers and small motors). Operating the Digital Impact Wrench 1. -
Page 13: Maintenance And Storage
Digital Impact Wrench Maintenance and Storage Before any intervention on the tool, ensure that the tool is disconnected from its power source. Maintenance • Clean the plastic parts with a soft, clean cloth. • Do not use aggressive cleaners (solvents or abrasive cleaners), or an abrasive sponge. •... - Page 14 Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death consult thepoints below and additionall y , the information available at www.datastreamserver.com/safety - Consult all documentation, packaging and - The product has been supplied by a general merchandise...
Need help?
Do you have a question about the IW1200 and is the answer not in the manual?
Questions and answers