System Requirements; Unpacking - QSC DCM-1 User Manual

SYSTEM REQUIREMENTS and UNPACKING

SYSTEM REQUIREMENTS

DCM Manager software is designed to control one DCM hardware unit at a time. To use this software
with the DCM hardware unit, you must have the following:
1- Digital Cinema Monitor unit
2- DCM Manager software installation CD
3- IBM-compatible PC with a 200 MHz Pentium processor (or better)
Windows 98, NT, XP, or 2000
Microsoft® Internet Explorer 4.0 (or later)
Minimum 16MB of RAM
Minimum 10MB of available hard disk storage space
CDROM drive
Display resolution of 800X600, 16 colors minimum
RS-232 serial port (COM port, 9-pin)
A standard DB9 RS-232 cable (male to female)
To complete your Cinema System, you will also need a cinema processor, QSC Audio's DCA amplifiers,
speakers, and necessary cables.

UNPACKING

The DCM is highly durable and carefully packaged. We recommend you inspect the unit carefully after
removing it from the packaging, as occasionally there may be damage due to some unfortunate incident
during shipment. Report any damage to the shipping carrier. We recommend saving the carton and
packing material in case the unit must be shipped back to your dealer, distributor, or service center. Also
note: some freight companies consider damage claims without the original packing materials invalid.
The QSC shipping box should contain:
1- the DCM unit
2- this owner's manual
3- four adhesive feet (for non-rack mounting installation)
4- AC power cord, IEC-type, 18 AWG, 6 feet long, 120V
5- warranty card
6- QSC store catalog
7- QSC accessories sheet
8- DCM Manager Application Disk
5