Subscribe to Our Youtube Channel
Related Manuals for Thermogroup Thermofan TF1800
Summary of Contents for Thermogroup Thermofan TF1800
- Page 1 TF1800 Thermofan Bathroom Fan Heater Installation Guide Please read these instructions carefully and in full before installation. Hardwire installation should be carried out by a qualified electrician.
-
Page 2: Safety Information
Leave the heater operating in small rooms if the room is unoccupied or the occupant is Remove and clean the filter at least unable to leave the room or turn the unit off every 6 months 1300 368 631 | www.thermogroup.com.au... -
Page 3: Installation
Finally, secure base of the unit of the unit to the wall with the screw provided. Plug your Fan Heater into a power point. 1300 368 631 | www.thermogroup.com.au... -
Page 4: Controls And Functions
The automatic electronic power selection, instead, manages the consumption through an accurate and comfortable regulation in order to automatically keep constant the selected temperature, according to what has previously been set on the electronic thermostat. 1300 368 631 | www.thermogroup.com.au... -
Page 5: Automatic Mode
ON position, the display shows 00:00 and begins counting the time starting from this value. Should no adjustment be made within 15min after power up, the product will automatically switch to Frost free mode with the lighting of the corresponding LED. ON/OFF 1300 368 631 | www.thermogroup.com.au... -
Page 6: Standby Button
3 seconds to enter the settings menu: Set the time: The 2 digits of the hour start flashing: set the current hour using buttons. Press to confirm The 2 digits of the minutes start flashing: set the current minutes using buttons 1300 368 631 | www.thermogroup.com.au... -
Page 7: Open Window Detection
five display buttons. Correct operation of this function may depend on where the radiator is positioned in the room, the presence of draughts, the outside temperature, and how long the window stays open. 1300 368 631 | www.thermogroup.com.au... - Page 8 If a difference between set temperature and room temperature is detected in stable working conditions, measure the difference and then increase or decrease the comfort temperature on the product of the exact value of measured difference. 1300 368 631 | www.thermogroup.com.au...
-
Page 9: Weekly Program
Stand-by button (Comfort temperature set by the user): The temperature can be changed by pressing the button. The LED Light corresponding to each different temperature (Comfort, Eco or Frost-Free) will light up in sequence to show the selected temperature. 1300 368 631 | www.thermogroup.com.au... - Page 10 At any time, you can abandon the procedure for editing the program deleting unsaved changes by pressing the Stand-By Button While programming the unit the heating elements are disconnected and the product will not heat. 1300 368 631 | www.thermogroup.com.au...
-
Page 11: Troubleshooting
Then turn on the heater using the same switch. Technical Data Supply Voltage 230V Wattage 1800W Warranty 2 Years IP Rating IP24 Width 270mm Height 450mm Depth 110mm Heating Capacity 10-15 m2 1300 368 631 | www.thermogroup.com.au... - Page 12 Contact Us Phone: 1300 368 631 | Technical Helpline: 1300 989 464 sales@thermogroup.com.au | www.thermogroup.com.au...
Need help?
Do you have a question about the Thermofan TF1800 and is the answer not in the manual?
Questions and answers