Page 1: Table Of Contents
ELEVON Assembly Instructions T BC Co ns ol e s CONTENTS: ....................PAGE 2 IMPORTANT INFORMATION BEFORE YOU BEGIN ......................PAGE 5 ..........................PAGE 6 PARTS LIST HARDWARE LIST ........................PAGE 7 ......................PAGE 8 BUILDING THE FRAME ....................PAGE 10 COUNTERTOP ATTACHMENT POWER STRIP & CABLE CORE ....................
Page 2: Important Information
Rev.1.2 Important Information Important information on TBC products can be found under the following headings: Warning! Failure to comply with these instructions may result in accidents involving serious personal injury. Failing to follow these instructions can result in the product being damaged or being destroyed.
Page 3 • Always use the supplied mains cable. • System connection. The individual parts must be connected before connecting the control box to the mains. See the User Manual for TBC actuators, if necessary. During operation • If the control box makes unusual noise or smells, switch off the mains voltage immediately.
Page 4 Lifting units under warranty must also be returned to authorized TBC workshops. Warning! If any of the Elevon products are opened, there will be a risk of subsequent malfunction. Warning! The Elevon systems do not withstand cutting oil.
Page 5: Before You Begin
Assistance is required during some parts of the assembly; look for this symbol: This system is a Elevon system developed for desks and for indoor use in offices. Do not use it in industrial kitchens or in other environments that have to be cleaned with aggressive detergents.
Page 6: Parts List
Rev.1.2 Parts For TBC replacement parts or to learn about other TBC products visit us online at tbcconsoles.com or call us at 1.888.CONSOLE Column - Qty (2) Vertical cable Beam - Qty (1) Foot - Qty (2) Left & Right...
Page 7: Hardware List
#8 x 1/2” Wood Screw Chain Link Mounting Clips Qty (4) Qty (2) Qty (2) Wire Collector (2 pieces) Plastic Cable Clamp #8 x 1-1/2” Flat Head Screw Qty (1) Qty (1) Qty (1) TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 7...
Page 8: Building The Frame
Mount the other cantilever in the other end of the beam. Check that the cantilever is placed correctly and cannot be twisted off the beam. Do not extract the beam using the cantilevers as handles. TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 8...
Page 9 Fix the column to the beam by pressing down until a “click” is heard and both pawls lock the column in the correct position. Check that both pawls are visible after mounting of the columns. Otherwise, remove the column and try again (see Disassembly, steps 4 and 5). TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 9...
Page 10: Countertop Attachment
• Use one of these to fix the mains cable to the beam with a cable clamp creating a cable relief, see Electrical System Step 4. #8 X 3/4” Screw #8 X 5/8” Screw Qty (12) Qty (8) TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 10...
Page 11: Power Strip & Cable Core
With a helper, position the cable core (F) under the counter top and ensure placement by aligning with the pre-drilled holes. Fasten the assembly to the countertop using 4 [AA] mounting screws as shown. #8 X 3/4” Screw Qty (4) TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 11...
Page 12: Electrical System
Ensure that only one desk panel at the time is connected Step 3 Step 4 Connect the power cable. Ensure to make a cable relief using the cable clamp when fastening the cable to the tabletop. TBC Consoles support@tbcconsoles.com 1-888-CONSOLE PAGE 12...
Page 13: Energy Chain
After installing the vertical cable trough on the back of the coulmn using the magnetic connection points, attach the Energy chain to both chain link mounting clips by compressing the chain end and fitting it into the clip. TBC Consoles support@tbcconsoles.com 1-888-CONSOLE...
Page 14: Disassembly
Disassembly Rev.1.2 For disassembling the Elevon, use a disassembly tool (included). 1. Drive the desk to its minimum height so the columns are completely retracted. 2. Disconnect from the mains supply. 3. Turn the table upside down. 4. Disconnect, unscrew and remove the desk panel.
Page 15: Tips & Error Codes
Elevon has a great feature which prevents overheating of the system. The temperature of the motor and the electronics is calculated by the SW during use and it depends on load, run time, etc. The Elevon duty cycle is 5 % ≈...
Page 16: Notes
All specifications and other information contained in this installation guide are based on the latest product information available at the time of printing. TBC Consoles is dedicated to product improvement and therefore reserves the right to make changes to the specifications of this and other products.

TBC ELEVON Assembly Instructions Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TBC ELEVON

Summary of Contents for TBC ELEVON

Table of Contents