Download Print this page

Hundure HAC-101 Series Quick Start Manual

Standalone access controller

Advertisement

Quick Links

1
Package Contents /包裝內容/ 包裝內容
Kindly ensure the product's contents upon unpacking; please refer to this quick start guide regarding the product 's
specifications and important notices.
打開包裝確認產品包裝內容,並請詳細閱讀此手冊,認識產品規格特性與注意事項。
打開包裝確認產品包裝內容,並請詳細閱讀此手冊,認識產品規格特性與注意事項。
Controller x 1
Quick Start Guide x 1
base x1
快速安裝手冊
主機/底座
快速安裝手冊
主機/底座
2
Physical Dimension /外觀尺寸/ 外觀尺寸
100
3
Installation /安裝/ 安裝
Kindly refer to the "
(A)
before the hardware installation.
Do not over tighten the back base screws during installation to
prevent distortion.
(A). Mount the back base onto the wall or other desired location.
(B). Connect the wires in accordance with the wiring instruction below.
(C). Make sure the back base and the controller upper cover guides are aligned.
(D). Install the controller upper cover to the back base.
(E). Fasten the screw onto the bottom of the controller.
安裝前請先參考 "
安裝主機底座時,請勿用力過大以避免造成彎曲變形。
(A). 將安裝底座固定在牆上或其他位置。
(C)
(B). 依照接線說明將線接上,並將各接線端子插上。
(C). 主機上方對準底座卡榫。
(D). 將主機往底座方向密合。
(E). 將螺絲由下方底部密合鎖上。
(B)
安裝前請先參考 "
安裝主機底座時,請勿用力過大以避免造成彎曲變形。
(A). 將安裝底座固定在牆上或其他位置。
(B). 依照接線說明將線接上,並將各接線端子插上。
(D)
(C). 主機上方對準底座卡榫。
(D). 將主機往底座方向密合。
(E)
(E). 將螺絲由下方底部密合鎖上。
4
Wiring Connections /接線/ 接線
The position of the components varies according to the controller's model. Kindly take note of the components
during setup.
零件位置依照機型而有所不同,請依實際零件編號做識別。
零件位置依照機型而有所不同,請依實際零件編號做識別。
Communication /通訊接線方式/通訊接線方式
EPC-406
USB Port
PC
HUB
E
Blue/藍/藍
Yellow/黃/黃
D
D
-
+
RS-485
- +
RS-485
MCU-0016 ID is from 3 to 6./MCU ID為3~6/MCU ID為3~6
HUNDURE
HUNDURE TECHNOLOGY CO., LTD.
standalone ACCESS controller
HAC-101 SERIES
Quick Start Guide
快速安裝手冊
快速安裝手冊
Ver. 1.0
HAC-101-QMA-20220113
610.0101.0700.10000
www.hundure.com
Screw x 4 Cable x 2
Hex Key Wrench x 1
六角扳手/螺絲/傳輸線
六角扳手/螺絲/傳輸線
24
61
31
94
4
wiring connections" for the NODE ID settings
4
接線" 設定主機NODE ID號。
4
接線" 設定主機NODE ID號。
: RS-485+
Yellow/黃/黃
(22AWG)
: RS-485
Blue/藍/藍
-
A
Battery
RS-485
RS-485+
A
Case Sensor
RS-485
C
B
防拆除Sensor
防拆除Sensor
RJ-45 Connector
RJ-45網絡接頭
C
TCP/IP
B
RJ-45網路接頭
-
RS-485
+
-
-
-
RS-485
+
+
Without ACU-30 for digital output /無外接ACU-30/ 無外接ACU-30
+
-
CARD
Slave Reader
+
DC
POWER
-
With ACU-30 for digital output /外接ACU-30/ 外接ACU-30
USB port
E
H
PC
+
DC
POWER
Scale:mm
-
Electric
Strikes
陰極鎖
陰極鎖
Elevator Mode: The exit button is the elevator maintenance switch, and the door contact is the elevator stop
switch.
2.To enhance security, kindly install the controller and the ACU-30 separately in different locations.
電梯模式:開門按鈕為電梯維護開關,門磁開關為電梯停用開關。
請搭配 ACU-30 使用。
使用斷電開門電鎖,如陽極電鎖,請接 COM 點及 NC 點。
使用通電開門電鎖,如陰極電鎖,請接 COM 點及 NO 點。
注意:1.RELAY最大承載電力請勿超過 DC 12V / 2A 或 DC 24V / 1A,如控制點設備為交流電源,請另行轉換
大功率電驛(繼電器)。
2.為提高門禁的安全性,安裝主機時須與ACU-30分開安裝在不同的位置。
電梯模式:開門按鈕為電梯維護開關,門磁開關為電梯停用開關。
請搭配 ACU-30 使用。
使用斷電開門電鎖,如陽極電鎖,請接 COM 點及 NC 點。
使用通電開門電鎖,如陰極電鎖,請接 COM 點及 NO 點。
注意:1.RELAY最大承載電力請勿超過 DC 12V / 2A 或 DC 24V / 1A,如控制點設備為交流電源,請另行轉換
大功率電驛(繼電器)。
2.為提高門禁的安全性,安裝主機時須與ACU-30分開安裝在不同的位置。
Important Notice:
*Please provide a separate power supply for each controller. A long transmission distance could cause power
degradation.
*If the controller is installed upon metallic object, add proper thickly plastic separator on back of controller for
isolation and avoid interference.
*The distance between two controller should be over 30cm to prevent radio frequency interference from each other.
注意事項
*主機請使用獨立電源, 以避免因傳輸距離的電流衰減而影響主機正常運作。
-
*主機感應距離容易受到金屬等物質的影響,安裝位置如為金屬材質, 建議在主機背部加裝適當厚度的隔離墊片。
*2個主機如果距離太近將會互相干擾而影響感應距離甚至無法感應, 建議2個主機之間的距離最少
/電池/
電池
注意事項
*主機請使用獨立電源, 以避免因傳輸距離的電流衰減而影響主機正常運作。
*主機感應距離容易受到金屬等物質的影響,安裝位置如為金屬材質, 建議在主機背部加裝適當厚度的隔離墊片。
*2個主機如果距離太近將會互相干擾而影響感應距離甚至無法感應, 建議2個主機之間的距離最少
5
Testing /測試/ 測試
Turn on Power
開啟電源
開啟電源
+
-
+
Reader beeps after 1 sec indicating startup
completed.
1秒後"嗶"一聲表示開機完成.
1秒後"嗶"一聲表示開機完成.
Add a card number(Kindly refer to " 6 Function
Setting" for more information)
新增單張卡號(請參閱" 6 功能設定").
新增單張卡號(請參閱" 6 功能設定").
One Year Limited Warranty /
We warrants this product against defect in material or workmanship for 1 year from the date of purchase. If such a defect is discovered within this warranty limitation,
contact your direct vendor for repair or replacement of your unit.
When returning the product, you must ship the product in its original packaging or packaging that gives an equal degree of protection. This warranty becomes invalid if
the factory-supplied serial number has been removed or altered on the product.
This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence or modification of any part of the product. This
warranty does not cover damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than We.
In no event shall We liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential, damages resulting from the use of the
product the product, its accompanying software, or it's documentation. We makes no warranty or representation expressed, implied, or statutory, with respect to its
products,contents of use of this documentation and all accompanying software, and specially disclaims its qualit
particular purpose. We reserves the right to revise or update its product, software or documentation without obligation to notify any individual or entity.
我們保固此產品於購買日起一年之內因為材料上或是生產製造中所產生的缺陷,所造成的外觀上,或是功能上的缺陷及故障問題。若是您在此保固期限之內發現此類
問題,請聯絡本公司的服務人員,退回此產品,我們將替您免費維修或是更換產品。
當您退回此產品時,請依照原始的包裝方式包裝此產品,或是給予同等級的包裝保護;若是我們收到此產品時,產品上沒有出廠時的序號標籤,或是產品已經拆開或與出廠時有任何不
同,這個保固將變得無效。
此保固不包含天然的,以及人為的破壞或改變 、或是意外事故、不正常操作、誤用、濫用等外在因素所造成的損壞。
此保固不包含不當的操作或保養,不當的連結至其他設備,或是由本公司以外的人員企圖修復此產品。
起因於使用這種產品,在間接、特別、次要因素,或者隨之發生,造成伴隨著軟件或其它文檔的損害,本公司的責任在任何情況下都不得超過這產品的售價。
關於產品的軟件和文檔編制的全部內容,本公司並沒有表示保證或法定它的性能、暢銷性、或者適用於任何特別的目的。
本公司保留權利修正或者不斷改進它的產品,軟件或者文檔編製無義務通知任何個人或者購買者。
我們保固此產品於購買日起一年之內因為材料上或是生產製造中所產生的缺陷,所造成的外觀上,或是功能上的缺陷及故障問題。若是您在此保固期限之內發現此類
問題,請聯絡本公司的服務人員,退回此產品,我們將替您免費維修或是更換產品。
當您退回此產品時,請依照原始的包裝方式包裝此產品,或是給予同等級的包裝保護;若是我們收到此產品時,產品上沒有出廠時的序號標籤,或是產品已經拆開或與出廠時有任何不
同,這個保固將變得無效。
此保固不包含天然的,以及人為的破壞或改變 、或是意外事故、不正常操作、誤用、濫用等外在因素所造成的損壞。
此保固不包含不當的操作或保養,不當的連結至其他設備,或是由本公司以外的人員企圖修復此產品。
起因於使用這種產品,在間接、特別、次要因素,或者隨之發生,造成伴隨著軟件或其它文檔的損害,本公司的責任在任何情況下都不得超過這產品的售價。
關於產品的軟件和文檔編制的全部內容,本公司並沒有表示保證或法定它的性能、暢銷性、或者適用於任何特別的目的。
本公司保留權利修正或者不斷改進它的產品,軟件或者文檔編製無義務通知任何個人或者購買者。
Model
型號
/
型 號
/
Warranty will be valid only after filling out this form and stamped or signed by reseller!
此保固書必須填妥各項內容,並且蓋有經銷商印鑑始為有效.
此保固書必須填妥各項內容,並且蓋有經銷商印鑑始為有效.
+
DC
DC
POWER
POWER
Pin1:RS-485-
Pin2:RS-485+
(22AWG)
USB port
Converter
Exit Button
PRESS
轉換器
H
開門按鈕
PC
轉換器
開門按鈕
TO
EXIT
Door Contact
CONTACT
-
門磁開關
門磁開關
Electric Bolt Lock
陽極鎖/ 陽極鎖
Bell
or
門鈴/門鈴
Electric Strikes
陰極鎖/ 陰極鎖
Pin1:RS-485-
Pin2:RS-485+
+
DC
POWER
-
ACU-30
Red
Door NC
Black
Door COM
+12V
Red
Yellow
Door NO
GND
Black
Blue
Alarm NC
SGnd
Yellow
Gray
Alarm COM
Door Relay
Blue
Purple
Alarm NO
Alarm Relay
Gray
Orange
None
Bell/Duress
Purple
Brown
Bell Out
White
Bell Gnd
CONTACT
PRESS
-
TO
EXIT
Electric Bolt
Alarm
Lock
Exit Button Door Contact
警報器
陽極鎖
開門按鈕
門磁開關
警報器
陽極鎖
開門按鈕
門磁開關
Press exit button, which will energize the door relay and make
electric-lock action last for 4 seconds (Access Control Mode)
Press exit button, which will energize built-in relay (Elevator Mode)
按開門按鈕,Door Relay動作,電鎖動作4秒.(門禁模式)
按開門按鈕,內建Relay動作.(電梯模式)
按開門按鈕,Door Relay動作,電鎖動作4秒.(門禁模式)
按開門按鈕,內建Relay動作.(電梯模式)
Reader beeps twice short beeps for valid card and three long
beeps for invalid card.
讀卡後"嗶嗶"兩短聲表示為合法卡,"嗶嗶嗶"三長聲表示為非法卡.
讀卡後"嗶嗶"兩短聲表示為合法卡,"嗶嗶嗶"三長聲表示為非法卡.
產 品 保 固 證 明 書
Serial no. /
序號
Date of Purchase /
序 號
/
購 買日 期
Red/紅/紅
DC +12V IN
Black/黑/黑
GND
-
Yellow/黃/黃
RS-485+
Blue/藍/藍
RS-485-
Purple/紫/紫
Door Relay Out
White/白/白
Alarm Relay Out
Orange/橙/橙
Exit Button
Gray/灰/灰
GND
Brown/棕/棕
Door Sensor
+
Green
NC
綠/綠
Red&White
Com
紅白/紅白
Gray&White
NO
灰白/灰白
Orange&White
CLK / W1
橙白/橙白
Pink/粉紅/粉紅
Data / W0
Red/紅/紅
DC +12V IN
Black/黑/黑
GND
Yellow/黃/黃
RS-485+
Blue/藍/藍
RS-485-
Purple/紫/紫
Door Relay Out
White/白/白
Alarm Relay Out
Orange/橙/橙
Exit Button
Gray/灰/灰
GND
Brown/棕/棕
Door Sensor
Green
NC
綠/綠
Red&White
Com
紅白/紅白
Gray&White
NO
灰白/灰白
+
Orange&White
CLK/ W1
橙白/橙白
Data/ W0
Pink/粉紅/粉紅
30
公分以上。
30
公分以上。
Test completed!
/測試完成!/
測試完成!
/
產 品 保 固 證 明 書
y
, performance, merchantability or fitness for any
購買 日期
Reseller stamp /
經銷 商
/
經銷 商
/
www.hundure.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the HAC-101 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Hundure HAC-101 Series

  • Page 1 HUNDURE TECHNOLOGY CO., LTD. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence or modification of any part of the product. This warranty does not cover damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than We.
  • Page 2 ◣0=English,1=繁體,2=簡体 ◣0=English,1=繁體,2=簡体 Language 語系 (出廠值 0=English) ◣Press F1 or F2 to select the language. ◣按F1/F2選擇其它 ◣按F1/F2選擇其它 Language 語系 (出廠值 0=English) Information / 主機訊息 / 主機訊息 [MASTER]#[主機訊息]#完成 [MASTER]#[主機訊息]#完成 Information [MASTER]#[info]#Completed ◣了解目前該主機的資訊 ◣了解目前該主機的資訊 ◣Allow user to read controller’s information 主機訊息/主機訊息 www.hundure.com www.hundure.com...