Table of Contents
Advertisement
BIOS Setup
Resume From S3 By PS/2 Mouse
This setting only works Resume From S3 By PS/2 KB is set to [Hot Key]. This
setting determines whether the system will be awakened from what power sav-
ing modes when input signal of the PS/2 mouse is detected. Setting options:
[Disabled], [Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled].
3-19
Hide quick links:
Advertisement
Table of Contents
