INTRODUCTION Thank you for purchasing a CLA-VAL e-Drive. We are confident that it will give you complete satisfaction in the use of your valve. With proper maintenance, this e-Drive will allow you to control your valve accurately and reliably for many years to come.
In accordance with our policy of continuous development and improvement, CLA-VAL Europe reserves the right to modify or improve these products at any time without prior notice. CLA-VAL Europe assumes no liability or responsibility for any errors or omissions in the content of this document.
E-DRIVE CHARACTERISTICS The e-Drive is a 4-20 mA standalone actuated controller which is PC calibrated and able to remotely control any CLA-VAL valve. The pilot setting can be adjusted with a standard 4-20 mA signal and a 4-20 mA position feedback signal is available to check if the requested position is reached.
To generate a calibration report, select "Parameters" and then "Report". Enter a reference number. Click on "Report". The Software will automatically generate a TXT report file (C:\Program Files\CLA-VAL\e-Drive Setup) including all the calibration settings. CLA-VAL Europe www.cla-val.ch cla-val@cla-val.ch...
Need help?
Do you have a question about the e-Drive-35 and is the answer not in the manual?
Questions and answers