Advertisement
Advertisement
Table of Contents
Related Manuals for Certa POWERPLUS CTPMUTIFUCA
Summary of Contents for Certa POWERPLUS CTPMUTIFUCA
- Page 1 POWERPLUS 20V CORDLESS MULTI FUNCTION TOOL (SKIN ONLY) CTPMUTIFUCA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Proper Use • The product is intended for sawing, cutting, and sanding. • The preferred materials for this device are wood, plastic, drywall, non-ferrous metals, fasteners (e.g., nails, screws), and wall tiles. It is particularly suitable for working close to edges and for precise work. - Page 4 Electric Safety • Ensure that the tool's plug fits securely into the outlet without modification. Never use an adapter with grounded power tools. Properly fitting plugs and suitable outlets reduce the risk of electric shock. • Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators to prevent an increased risk of electric shock.
- Page 5 Operation and Handling of the Power Tool • Do not force the power tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it was designed. • Do not use the tool if the switch does not turn it on and off. A tool that cannot be controlled with the switch is dangerous and must be repaired.
- Page 6 Special Safety Instructions • When operating the power tool, always hold it firmly with both hands and ensure you maintain proper footing and balance. • Secure the workpiece with clamps or a vice, which is safer than holding it by hand. •...
- Page 7 Important. Read the instructions for use before starting the machine. Wear safety goggles. Wear ear protection. Wear good quality, strong gloves. Always use breathing apparatus when machining materials which generate dust. Battery Li-ion. Avoid continuous sunlight. Keep away from fire. Do not throw it into water.
- Page 8 COMPONENTS Cordless Multi Function Tool Body Straight Saw Blade Half Round Saw Blade Scraper Sanding Pad Sanding Sheets (x3)
- Page 9 OVERVIEW Stationary shaft Speed control switch Quick-change button Battery pack Lock-off switch Battery charger Power switch Push lock button...
-
Page 10: Before First Use
BEFORE FIRST USE Charging the Battery Pack Remove the battery pack (6) from the handle by pressing the push-lock buttons (8) downwards. Check that your mains voltage corresponds with that marked on the rating plate of the battery charger. Plug the main plug of the charger (7) into the socket outlet. The temperature of the battery pack may rise slightly during the charging operation, which is normal. -
Page 11: Operation
OPERATION Changing the Attached Tool Press the quick-change button (2). Insert the tool into the stationary shaft (1). Release the quick-change button (2). Bringing into Use Press the lock-off switch in any direction (3). Press the Power switch to operate the tool (4). To adjust speed based on the cutting environment, use the speed control switch (5). - Page 12 Selecting a Tool Straight Saw Blade: • Material: Sheet and tube metals up to approximately 3 mm thick, such as soft aluminium. • Use: Cutting and plunge sawing. Close to the edge sawing, even in hard-to-reach areas. • Example: Laying parquet and other floor coverings, including plunge sawing. Half Round Saw Blade: •...
-
Page 13: Specifications
SPECIFICATIONS • Rechargeable Battery: 20V d.c. • No-load Speed: 5000-18000 RPM. CLEANING & CARE Always remove the battery from machine before performing any cleaning or maintenance. Cleaning • Keep all safety devices, air vents and the motor housing free of dirt and dust. •... - Page 14 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the POWERPLUS CTPMUTIFUCA and is the answer not in the manual?
Questions and answers