Marshall Electronics MXL AC-83 Quick Start Manual

AC - 83
Bluetooth LE 5.0 Enabled Boundary Mic
The MXL AC-83 Bluetooth mic is an ideal solution for
any application that requires professional voice clar-
ity. This microphone is a perfect wireless solution for
any Mobile Conference Call, Telemedicine, Huddle
Room, Classroom, and more. Offering crystal clear
speech intelligibility, the AC-83 removes the barriers
that unclear audio creates. With the addition of our
capacitive touch mute switch, it makes the AC 83 a
perfect solution for every call. For best results, please
take a few moments to review this literature.
Windows PC Pairing Procedure
Open the Bluetooth and other devices system settings on
your Windows PC. These settings can be found by typing
"Bluetooth and other devices" in the search box at the bot-
tom of the screen and pressing Enter.
Use the Bluetooth toggle slider to turn Bluetooth ON, then
click the Add Bluetooth or other device button. The Blue-
tooth Add a Device window will then appear on screen.
Next you will want to initiate pairing mode on the MXL AC-83.
Press and hold the Bluetooth Power Button for 6-8 seconds
to enable pairing mode.
The blue and yellow LEDs will begin flashing to indicate that
the unit is in pairing mode.
Next click on the Bluetooth
option in the Add a device
window.
Bluetooth devices within range
will begin appearing in the
window. Select MXL AC-83
once it appears on screen.
Tech Specs
Mic Type .....Bluetooth 5.0 certified / USB 2.0, type C connector
Capsule ...........3 Capsule boundary design with 180º coverage
Frequency Response ...............................................................40 Hz – 16 kHz
Polar pattern ..................................................................................Wide Cardioid
Signal-to-noise Ratio ................................................................................... 92dB
THD+N .........................................................................................................................0.01%
Power Source .......Rechargeable Battery through the included
USB-C Connection
180º PICK UP PATTERN
The PC and microphone will now attempt to establish a Blue-
tooth connection. Once the device has been successfully
paired, the flashing on the MXL AC-83 will stop and the yellow
LED will remain illuminated. A message will pop up on screen
indicating that the pairing was successful.
Now that a microphone has been successfully paired with
the computer, you will need to select the correct settings in
the Sound settings control panel. Type "sound settings" in the
search box at the bottom of the screen and press enter to open
the Sound settings control panel window.
The Sound settings control panel window will appear showing
your currently active sound devices. You will need to select the
correct devices for both Input and Output.
For the Input device, select Headset Microphone (MXL AC-83
Hands-Free AG Audio).
For the Output device, you can enable the AC-83 headphone
output by selecting Speakers (MXL AC-83 Stereo). You can
alternatively select your current speakers or your computer's
headphone output.
Your MXL AC-83 microphone is now ready to use with your
Windows PC.
Unified Communications
TRANSMITS UP TO 200 FT.
Continued on next page