MSI Crystal A410 User Manual page 53

PWRON After PWR-fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off]
[On]
[Former-sts]
Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
Wake-Up by PCI card
W hen setting to [Enabled], the feature allows your system to be awakened by
PCI card.
USB KB Wake-Up from S3
This setting allows you to enter "Any Key" (max. 8 numbers) to wake up the
system from S3 state. S
Resume By Alarm
The field is used to enable or disable the feature of booting up the system on a
scheduled time/date.
Date
The field specifies the date for Resume By RTC Alarm. Settings: [0]~[31].
choosing [S1&S3[ option. But if there are any devices
do not support S3 mode, system will enter S1 mode
instead of S3 mode.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
BIOS Setup
3-17