Table of Contents
Advertisement
M S-6473
Introduction
The built-in mainboard is designed for MS-6422 only. Except the mainboard, the
built-in components of the barebone include power supply. In this chapter we'll show
you how to install CPU and thermal kit, mini-PCI card, card reader, floppy drive, HDD,
optical drive and memory module.
Necessary Tools
Cross type screwdriver, can be used to do most of the
installation. Choose one with a magnetic head would be
better.
Pliers, can be used as an auxiliary tool to connect some
connectors or cables.
Forceps, can be used to pick up tiny screws or set up the
jumpers.
Rubber gloves, can prevent yourself from being incised and
suffering the static charge.
Electric screwdriver, can be used to lock the stand.
2-2
Advertisement
Table of Contents
