User Set Up - Lorex QLR-0440 Series Instruction Manual

10. User Set Up

This section is user to add/delete users, make password changes, as well as determine when passwords
will be required.
•
User List: Displays users registered to use this system. You can add, modify, or delete user's using this
menu. The registered ID/password is used when accessing the system remotely from the Client or
Search program. A user must be set up in the area in order to gain remote access.
Clicking 'ADD' or 'MODIFY' brings up the window below:
▪ User ID: Enter user's ID to use.
▪ Password: Enter the password
▪ Confirm password: Enter again the password.
▪ Level: Select the user authority level.
Default Passwords:
Administrator – ID: power, PW: master
Power User – ID: power. PW: 1111
User – ID: LOREX, PW: 1111
- 30 -