Related Manuals for Oupree OPR-NH100N
Summary of Contents for Oupree OPR-NH100N
- Page 1 H.264 / H.265 Video Encoder for 4K FHD Encoder User Manual Oupree Technology Company Limited https://www.oupree.com...
- Page 2 19" 1U/3U Rack available for all device. some models may not List here. Item No. Description Picture Dimension Input: HDMI: 1080P/60fps and below OPR-NH100N 165*130*30mm H.264 HDMI Encoder Output: Stream 1080P@60fps and below Input: HDMI: 1080P/60fps and below OPR-NH100PH H.265 HDMI Encoder...
- Page 3 Item No. Picture Description Dimension Input: HDMI: 1080P/60fps and below OPR-NH100P 165*130*30mm H.265 HDMI Encoder Output: POE Option Stream 1080P @ 60fps and below Input: OPR-NH100PS SDI: 1080P/60fps and below 165*130*30mm H.265 SDI Encoder with SDI loop back Output: Stream 1080P @ 60fps and below Input: OPR-NH400PU HDMI / SDI: 1080P/60fps and below...
- Page 4 Factory Default Settings English UI - http://192.168.1.168/indexE.html User name & Password - admin Introduction This device convert video & audio signals to IP streams, and send the IP streams to media streaming server (Wowza, nginx, etc,.) or online live broadcast platform, such as YouTube, Facebook, Ustream, Twitter, etc, over network.
- Page 5 Encoder Control Panel - It may little different with below photos for the firmware maybe upgraded. Status Display Input Status - show the information of the signals input and each output stream informations. Running Time:0000-00-00 01:41:21 CPU Usage: 12% Input Size:1920x1080p@60 Collected Video Frames:65116 Lost Video Frames:2 Audio Samplerate:48000...
- Page 6 When the encoder has DHCP enabled, it is important to ensure that the correct DNS settings are configured for the encoder.
- Page 7 Mainstream encoding settings...
- Page 8 RTMP(S) Settings 1. Wowza - rtmp://serverIP:port/Application/stream name I.E rtmp://192.168.1.50:1935/live/oupree If with Source Authentication, and source User Name - oupree, password - 123456, the address will be like, rtmp://oupree:123456@192.168.1.50:1935/live/oupree Support the overlay of text, scrolling text, 2. OSD -...
- Page 9 Audio & Video Encoding Settings Usually, keep as default, but you can set it according to your needs.
-
Page 10: Upgrade Firmware
System Settings You can change the password for the encoder. Upgrade firmware- https://dl.oupree.com/Encoder-Firmware.html select the right firmware which download from our website, and upload it, if upload success, please reboot the encoder. - Page 11 1. How to Reset the encoder? When you power on the device, press the RST (Reset) button for approximately 10 seconds until the status LED turns off. Once the LED is off, release the button to allow the encoder to initialize. This process will reset the encoder to its factory default settings.
- Page 12 Test Stream by VLC After all settings are ok, you can use VLC to test the stream. If you have any questions or need assistance with the OUPREE Video Encoder, visit here or mail to us, https://www.oupree.com/support/ support@oupree.com...
Need help?
Do you have a question about the OPR-NH100N and is the answer not in the manual?
Questions and answers