Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Oupree OPR-NH200PD
Summary of Contents for Oupree OPR-NH200PD
- Page 1 H.265/264 Video Decoder Manual...
-
Page 2: Table Of Contents
Index Environment Settings ....................... 3 1.1. Hardware Interface ..........................3 1.1.1 Front Side view ............................. 3 1.1.2 Back Side view ............................3 Management Settings ......................4 Login ..............................4 Address setting - Input Streaming URL ....................4 System setting ............................4 2.3.1 System output ............................ -
Page 3: Environment Settings
1. Environment Settings 1.1. Hardware Interface 1.1.1 Front Side view From Right to Left： ① DC5-12V: 5V 2A or 12V 1A ② Ethernet: 1000 Mbit/s full-duplex ③ HDMI Output ④ VGA Output ⑤ CVBS Output ⑥ AUDIO Output ⑦ RST: Reset button 1.1.2 Back Side view ①... -
Page 4: Management Settings
2. Management Settings 2.1 Login Open http://192.168.1.169 (default IP) by Explorer to login the decoder, default user name and password are admin. 2.2 Address setting - Input Streaming URL Max can input 4 streaming address, and output them. 2.3 System setting 2.3.1 System output To set the video output resolution, also with the video quality adjust option. -
Page 5: Network Setting
2.3.2 Network Setting Ensure the decoder IP address with your router in same gateway, once settled, please reboot the decoder. 2.3.3 Password Setting Change the password – default user name and password are admin. -
Page 6: System Update
2.3.4 System Update Ensure the Upgrade file name is up.rar. Please don’t upload by different people at the same time, don’t power off or refresh the page during upload. 2.3.5 Reset device After reset the device, all settings will roll back to factory settings. -
Page 7: Reboot Device
2.3.6 Reboot Device After your settings settled, then click the reboot button to let the settings effective. 2.4 Status 2.4.1 System Status After all settings settled, from the status page, you can check each channel output video status, if any error, please ensure the streaming URL is correct. -
Page 8: How To Reset The Decoder
3. FAQ 3.1 How to reset the decoder? When power on, hold the RST button around 10 seconds till the status led off, then release it, the decoder will be initialized. 3.2 I can’t enter into the decoder control panel or ping it? 1) Ensure the decoder IP with your router in same gateway, such as Decoder IP is 192.168.1.169, but your router IP is 192.168.0.1 or else, in this situation, you need connect the decoder with your computer directly, and set the computer IP to 192.168.1.106, then enter the decoder control panel - Network, set the its IP to 192.168.0.169, click setup, and...
Need help?
Do you have a question about the OPR-NH200PD and is the answer not in the manual?
Questions and answers