Chapter2
Chapter 2:
Confguraton Usng the
Setup Wzard
After first-time installation of the Network Storage
System with the Setup Wizard (located on the CD-ROM),
the Network Storage System is ready for use. However,
additional configuration is available with the Setup Wizard
and web-based utility.
Use the Setup Wizard for the following tasks:
Configure another computer to use the Network
•
Storage System
Add a second hard drive to the already configured
•
Network Storage System
Install backup software on your computer
•
Access the web-based utility
•
Install the Linksys Network Drive Mapping Utility
•
Access the User Guide on the CD
•
Use the web-based utility for advanced configuration
(refer to "Chapter 3: Advanced Configuration" for details).
How to Access the Setup Wizard
1.
Insert the Setup Wizard CD-ROM into your PC's CD-ROM
drive. The Setup Wizard should run automatically,
and the Welcome screen should appear. If it does not,
click Start and then Run. In the field provided, enter
D:\SetupUtlty.exe (if "D" is the letter of your CD-ROM
drive).
2.
Click the Clck Here to Start button.
Welcome Screen
Network Storage System wth 2 Bays
Configuration Using the Setup Wizard
3.
You have multiple options on this screen:
Welcome Screen with Options
Set up NAS200
Install the Network Storage
–
System for the first time. (The instructions are
covered in the Quick Installation.)
Set up Computer
Configure another computer to
–
use the Network Storage System.
Set up Second Drve
–
the already configured Network Storage System.
Ext
Use this option to close the Setup Wizard.
–
Backup Software
Install a third-party program to
–
run backup jobs.
Advanced Setup
Use this option to access the
–
web-based utility.
Install Utlty
Use this option to install the Network
–
Drive Mapping Utility.
User Gude
Use this option to open the pdf of this
–
User Guide.
Set up Computer
Follow these instructions to configure another computer
to use the Network Storage System.
1.
Click Set up Computer.
Add a second hard drive to