Linksys NAS200 User Manual page 10

Chapter2
5. Select the appropriate configuration for your drive
usage:
NOTE:
If you change the drive configuration
setting (for example, from Separate Disks to
RAID 1), both drives will be reformatted and all
current data will be erased. Back up any pre-
existing data before reconfiguring your drives.
Maxmum Storage - Separate Dsks
–
separately.
Maxmum Storage
–
(JBOD/LVM)
Drives seen as a single virtual drive.
Maxmum Securty - Mrrorng (RAID )
–
two hard drives.
Maxmum Speed - Strpng (RAID 0)
–
two hard drives.
Click Next.
Select Drive Configuration
Network Storage System wth 2 Bays
Drives seen
- Multple Dsks
Requires
Requires
Configuration Using the Setup Wizard
6. Review the new settings. If they are correct, click Save.
If you would like to change them, click Back to return
to the previous screen.
Confirm New Settings
7. To confirm that you want to format your drives and
erase all data on them, click Next.
WARNING:
Before you format drive(s), back
up pre-existing data because all data on
your drive(s) will be erased when they are
formatted.
If the drives have been previously formatted by the
Network Storage System, click Skp to continue
without reformatting.
Confirm Formatting
6