Download Print this page

Kaiser & Kühne 055485503 Instructions For Maintenance

Climbing combination

Advertisement

Quick Links

Instructions for maintenance
In addition to the manufacturer-
related service instructions, we
strongly advise the operator/owner to
consider the corresponding
prescriptions of the European
Standard EN1176-7.
K&K Climbing
055485503
combination
One-time maintenance
Check all screw connections; retighten, if necessary.
Recommended regular inspection and
maintenance
Where appropriate, clean playing sand
Check cleanliness of playing and safety area. Remove any foreign
object
Check chains of spatial climbing net for wear, replace if necessary.
The nominal chain thickness must not diminish more than 30% (<
5 mm). Beyond that limit, a chain replacement is indispensable.
Check climbing handles for wear, replace if necessary
Check cleanliness of sliding surfaces, remove protruding parts,
exchange damaged sliding course coverings
In case of drying cracks, remove splinters of wood and chamfer
sharp edges
Where appropriate, check synthetic surfacing material for
damages or severe wear, repair or replace, if necessary
Check tightness of stand construction: stability of (vertical) posts or
supports, retighten screw connections, if necessary.
Check further structural components for wear and tightness;
retighten, if necessary and replace defective parts.
Check tension and damages of the climbing ropes, replace if
necessary
Check foundations and structural construction for corrosion or
decay, repair or replace if necessary
Please note: The above-mentioned maintenance intervals only have recommendatory character.
They must necessarily be adapted to the local circumstances of each playground (frequency of
use, social setting, risk and frequency of vandalism etc.).
Im Südloh 5 – D-27324 Eystrup – T: + 49 42 54/93 15-0 – F: + 49 42 54/93 15 24 –
once,
approx. 4-5 weeks after installation
info@kaiser-kuehne-play.com
Page 1 of 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the 055485503 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kaiser & Kühne 055485503

  • Page 1 European Standard EN1176-7. K&K Climbing 055485503 combination One-time maintenance once, Check all screw connections; retighten, if necessary. approx. 4-5 weeks after installation Recommended regular inspection and...
  • Page 2 Instructions for maintenance Factory default 2-1,5 mm Minimum reference dimension 0,8 mm = replacement Appropriate measuring tools: • Drill bit Ø 0,8 mm or • Calliper gauges or • Feeler gauges Im Südloh 5 – D-27324 Eystrup – T: + 49 42 54/93 15-0 – F: + 49 42 54/93 15 24 – info@kaiser-kuehne-play.com Page 2 of 2...