LG 60PC1D Owner's Manual page 30

Installation
Screen Setup for PC mode
- When RGB connect to PC input and select the RGB-PC, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
* Adjustment for screen Resolution, Position, Size, and Phase
4 5
7 8
0
EZ PIC EZ SOUND
ADJUST
ADJUST
Mini Glossary
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size This function is to minimize
any vertical bars or stripes
visible on the screen back-
ground. And the horizontal
screen size
change.
Phase This function allows you to
remove any horizontal noise
and clear or sharpen the
image of characters.
Resolution This function allows you
select Resolution
XGA/WXGA.
* Initializing (Reset to original factory values)
1
4
7
EZ PIC EZ SOUND
ADJUST
ADJUST
- To initialize the adjusted values
28
6
9
FLASHBK
SAP CC
1
2
3
will also
* When you change the resolution, select the proper resolution
of
2 3
5 6
8 9
FLASHBK
0
SAP CC
1
2
3
Press the ADJUST button and then use
,
Press ENTER button and then use
make appropriate adjustments.
• The adjustment range is -16 ~ +16.
(In HDMI/DVI-PC mode,
• The adjustment range is -30 ~ +30.
(In HDMI/DVI-PC mode,
Press ENTER button.
in present input to see the best picture appearance.
Press the ADJUST button and then use
the option.
Press ENTER button and then use
Press ENTER button.
button to select
D D / E E
, , or .
D D / E E / F F / G G
is not available.)
is not available.)
D D / E E
F F / G G button to select
buttons to
button to select
.