Troubleshooting Checklist - LG 60PC1D Owner's Manual

Reference
T roubleshooting Checklist
T roubleshooting Checklist
The remote control
doesn't work
Power is suddenly
turned off
No picture &
No sound
Picture appears
slowly after
switching on
No or poor color
or poor picture
Horizontal/verti-
cal bars or pic-
ture shaking
Poor reception on
some channels
Lines or streaks
in pictures
64
The operation does not work normally.
• Check to see if there is any object between the product and the remote
control causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries.
• Is the sleep timer set?
• Check the power control settings. Power interrupted
• No broadcast on station tuned with Auto off activated.
The video function does not work.
• Check whether the product is turned on.
• Try another channel. The problem may be with the broadcast.
• Is the power cord inserted into wall power outlet?
• Check your antenna direction and/or location.
• Test the wall power outlet, plug another product's power cord into the outlet
where the product's power cord was plugged in.
• This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after five
minutes.
• Adjust Color in menu option.
• Keep a sufficient distance between the product and the VCR.
• Try another channel. The problem may be with the broadcast.
• Are the video cables installed properly?
• Activate any function to restore the brightness of the picture.
• Check for local interference such as an electrical appliance or power tool.
• Station or cable product experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
• Check antenna (Change the direction of the antenna).