Related Manuals for Laney LIONHEART L20H
Summary of Contents for Laney LIONHEART L20H
- Page 2 – making it ideal for any style of playing. Equally at home on stage plugged into a Laney LT112 or LT212 cabinet or perfect for studio use.
- Page 3 BRIGHT: Adds brightness and life to the treble frequencies of your guitar when on the clean channel. Adds edge and picking emphasis when on the drive channel. The switch has more effect at low Clean Volume/Drive control settings. Use in conjunction with the Treble and Tone controls for optimum performance. Switch up to enable. www.laney.co.uk...
- Page 4 (OFF) position in order for the drive to be switched remotely via a foot switch). DRIVE LED: This led will illuminate when the Drive channel is activated with the Drive switch (8) or the included Laney FS2-MINI remote footswitch. BASS, MIDDLE, TREBLE: These are a traditional set of passive tone controls. Passive controls have the advantage of always sounding musical at any of their settings mainly due to their unique interactive nature.
- Page 5 Switch to standby for short breaks when you don’t want to wait for the tubes to warm up again. 13 - POWER LED: This LED will be lit when the amplifier is switched on. (Always switch off and disconnect the power cord when not in use). www.laney.co.uk...
- Page 6 18 - EXTENSION CABINET: Use to connect an 8-16 ohm extension cabinet. Please note mis- matched impedance will reduce the amplifiers performance and in some cases may cause damage to your amplifier. www.laney.co.uk...
- Page 7 • Bypass - Removes the FX loop from the signal path. FX SEND: Mono jack socket for connection to the input of an external FX unit. FOOTSWITCH SOCKET: Provided for connection of the included Laney FS2-MINI 20 - footswitch. This allows you to remotely switch between the clean/drive channel and switch the built in reverb On/Off.
- Page 8 AND grade as factory fitted otherwise, they should be replaced as a set. See the diagram following to see how to check the tube grade fitted. Exact replacement preamp tubes and matched sets of output tubes are available from Laney via your dealer. www.laney.co.uk...
- Page 9 • Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage. Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel. www.laney.co.uk...
- Page 10 L20H USER MANUAL - EN TUBE TABLE ECC83 005570 ECC83 005570 ECC83 005570 V4-V7 EL84 005563 www.laney.co.uk...
- Page 11 L20H USER MANUAL - EN www.laney.co.uk...
-
Page 12: User Settings
L20H USER MANUAL - EN QUICK START SETTINGS - suggestions only. USER SETTINGS www.laney.co.uk... - Page 13 Middle Treble Reverb Tone External Speaker socket FX loop/LINE OUT send FX Loop Return Footswitch socket (FS2-MINI) Unit Size/mm L20H 255x565x255 (HxWxD) Unit Weight L20H 15.5 Kg. Carton Size mm L20H 375x740x375 (HxWxD) Packed Weight L20H 18.5 KG L20H www.laney.co.uk...
Need help?
Do you have a question about the LIONHEART L20H and is the answer not in the manual?
Questions and answers